Victron Energy Phoenix Smart 1600 VA Inverter 12V 24V

Free delivery in 1-3 weeks

IMPORTANT NOTE: The price of this product includes 10% or 22% VAT.  See details below.

Inverter Victron Phoenix Smart 1600 VA

The Victron Energy Phoenix Smart device is a 1600 VA pure sine wave inverter with Bluetooth for remote control from a smartphone or tablet.

Integrated Bluetooth: Fully configurable with a tablet or smartphone

• Low battery voltage alarm
• Dynamic low battery voltage cut-off and restart levels: Load-dependent cut-off level
• Output voltage: 210 - 245V
• Frequency: 50Hz or 60Hz
• ECO mode on/off and ECO mode detection level
• Alarm relay

Monitoring:

• Input and output voltage, load and alarm

VE.Direct communication port

The VE.Direct port can be connected to a computer (a VE.Direct to USB interface cable is required) to configure and monitor the same parameters.

Proven reliability

The toroidal transformer architecture has proven its reliability over the years. The inverters are protected against short circuits and against overheating, both due to overload and ambient temperature.

High starting power

Required to start loads such as energy converters for LED lamps, halogen lamps or electric tools.

ECO mode

When in ECO mode, the inverter will switch to standby if the load drops below a pre-set value. In standby, the inverter will activate for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.

Remote on/off

A remote on/off switch or relay contact can be connected to a two-pole connector.
Alternatively, the H (left) terminal of the two-pin connector can be swapped with the positive pole of the battery, or the L (right) terminal of the two-pin connector can be swapped with the negative pole of the battery (or the a vehicle, for example).

Download the PDF file Technical Specifications

IMPORTANT NOTE: The price of this product includes 10% or 22% VAT.  
The reduced VAT is reserved for end users of photovoltaic and thermal systems for the production of heat or energy residing in Italy.
To take advantage of the reduced VAT rate, you need to sign a DECLARATION which will be sent to you after the purchase. Which must be sent to us by attaching the Identity Document. For more information on the 10% VAT relief and to download the declaration to fill in Click Here.