V-TAC Italia
Deye 6 kW Single-phase Hybrid Inverter Kit with 9.6 kWh LiFePO4 Storage – CEI 0-21
Deye 6 kW Single-phase Hybrid Inverter Kit with 9.6 kWh LiFePO4 Storage – CEI 0-21
Businesses and private customers abroad: purchase with 22% VAT. The 10% VAT rate is reserved for private customers resident in Italy — learn more.
Foreign businesses entitled to 0% VAT: write to info@litio.store.
Italy: free. European Union: €350.
Deye 6 kW Single-phase Hybrid Inverter Kit with 9.6 kWh LiFePO4 Storage
Conversion and storage ready to use for low-voltage residential systems
🚚 Fast delivery in 10-20 days.
The heart of the system: inverter + storage
A complete conversion and storage solution for residential photovoltaic systems and small businesses, suitable both for new installations and for retrofits on existing systems with a low-voltage architecture. Photovoltaic modules are not included and must be sized according to the available roof.
| ⚡ 6 kW Hybrid inverter |
🔋 9.6 kWh LiFePO4 storage |
📡 WiFi + 2 MPPT Monitoring |
🔌 Single-phase CEI 0-21 |
Kit composition
1× Deye LV 6 kW single-phase hybrid inverter WiFi CEI 0-21 IP65
Dual independent MPPT with 150-425 V range, PV input power up to 9.6 kW, maximum efficiency 97.6% and MPPT efficiency above 99%. AC output 230 V, 6 kW nominal and up to 30 A, THDi < 3%. Supports on-grid, off-grid and zero export operation, with a WiFi interface for remote monitoring and configuration.
1× LiFePO4 rack storage battery 9.6 kWh – 48 V 200 Ah
Module with integrated BMS, CAN/RS485 communication, maximum current of 100 A in charge and discharge and peak power of 4.8 kW. Over 6,000 cycles, wall or rack installation, expandable up to 16 units in parallel.
Operation and energy management
The low-voltage architecture allows coordinated management of generation, storage and loads, with on-grid, off-grid and EPS operation for energy continuity. The zero export function enables use on systems with grid feed-in limitations. The inverter integrates DC- and AC-side protections, active cooling and wall mounting with IP65 protection rating.
CAN/RS485 communication between inverter and battery allows monitoring of the state of charge and management of the operating thresholds. 10-year warranty on inverter and storage.
What is included and what is not
The product includes only the hybrid inverter and the battery indicated. Photovoltaic modules, mounting structures, combiner boxes, cables, connectors, installation, paperwork, commissioning and additional protections required by the design are not included. Installation must be carried out by qualified personnel.
Share
