• Batteria Accumulo Alta Tensione Dyness Tower Pro 11,52kWh 288V LiFePO4 con BDU
1 1

Dyness

Dyness Tower Pro 11.52kWh 288V LiFePO4 high-voltage battery with BDU

Dyness Tower Pro 11.52kWh 288V LiFePO4 high-voltage battery with BDU

€2,414.12
€2,414.12
Sale Sold out Excl. VAT — calculated in the cart210 €/kWh
See the price with VAT

Price including VAT by delivery country

  • Italy22% €2,945.22
  • Germany19% €2,872.80
  • France20% €2,896.94
  • Austria20% €2,896.94
  • Belgium21% €2,921.08
  • Bulgaria20% €2,896.94
  • Croatia25% €3,017.65
  • Cyprus19% €2,872.80
  • Czech Republic21% €2,921.08
  • Denmark25% €3,017.65
  • Estonia24% €2,993.50
  • Finland25.5% €3,029.72
  • Greece24% €2,993.50
  • Hungary27% €3,065.93
  • Ireland23% €2,969.36
  • Latvia21% €2,921.08
  • Lithuania21% €2,921.08
  • Luxembourg17% €2,824.52
  • Malta18% €2,848.66
  • Netherlands21% €2,921.08
  • Poland23% €2,969.36
  • Portugal23% €2,969.36
  • Romania21% €2,921.08
  • Slovakia23% €2,969.36
  • Slovenia22% €2,945.22
  • Spain21% €2,921.08
  • Sweden25% €3,017.65

Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).

See the shipping cost

Pallet shipping by country

up to 500 kgup to 750 kg
  • Italy230 € 320 €
  • Austria230 € 320 €
  • Belgium230 € 320 €
  • Czech Republic230 € 320 €
  • Denmark230 € 320 €
  • France230 € 320 €
  • Germany230 € 320 €
  • Luxembourg230 € 320 €
  • Netherlands230 € 320 €
  • Poland230 € 320 €
  • Spain230 € 320 €
  • Bulgaria320 € 410 €
  • Croatia320 € 410 €
  • Estonia320 € 410 €
  • Finland320 € 410 €
  • Greece320 € 410 €
  • Hungary320 € 410 €
  • Ireland320 € 410 €
  • Lithuania320 € 410 €
  • Portugal320 € 410 €
  • Romania320 € 410 €
  • Slovakia320 € 410 €
  • Slovenia320 € 410 €
  • Sweden320 € 410 €
  • Latvia320 € 329.24 €
  • Maltaon request
  • Cypruson request

The price does not include shipping. Goods travel on a pallet with a dedicated carrier: half pallet up to 500 kg, full pallet up to 750 kg. Above 750 kg the cart adds the further pallets on its own. The exact amount is shown in the cart.

Shipping not included

74 units at this price

 Configure your system in two minutes Pick the inverter and get the batteries it accepts, modules per string, switchboards, price per kWp and a cart ready to check out. Open the configurator →
See our resellers Become a distributor or reseller Contact us
  • Prices exclude VAT: tax is calculated in the cart based on the delivery country.
  • EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
View full details
Delivery in 10-20 daysDyness

Dyness Tower Pro 11.52kWh 288V LiFePO4 high-voltage battery with BDU

The Dyness Tower Pro 11.52kWh is a complete high-voltage storage tower: 3 LiFePO4 battery modules of 3.84kWh each plus the BDU control unit and its base, under one product code. It stores what the array makes during the day and gives it back in the evening, or when the grid drops, without your having to assemble the system piece by piece.

The BDU is the brain of the tower: it handles the link to the high-voltage hybrid inverter, carries the LED status display and allows remote monitoring and firmware updates. Modules stack onto the base and identify themselves — no addresses or DIP switches to set by hand.

The tower does not stop at 11.52kWh. Identical modules go in up to six per column, and when one column is not enough, up to twelve clusters run in parallel for 276.48kWh in total. Declared depth of discharge is 95% and charging accepts 1C, that is up to 11520W in this configuration: the tower fills during the middle of the day rather than trickling. The IP54 enclosure allows installation in rooms that are not perfectly dry. Check your inverter against the official Dyness compatibility list; installation and commissioning must be carried out by qualified personnel.

Why this battery

11.52kWh completeThree 3.84kWh modules and the BDU control unit with base, under one code.
Expandable to 276.48kWhUp to six modules per tower and twelve towers in parallel.
Self-configuring modulesThey stack and identify themselves: no addresses to set.
1C fast chargingUp to 11520W charging, with 95% depth of discharge.
IP54 and OTA updatesProtected enclosure, remote firmware and monitoring through the BDU.

Technical specifications

Specification Value
Product code DY-TOWER-PRO-TP11
Manufacturer Dyness
Series Tower Pro
Type High-voltage storage tower
Composition 3 battery modules of 3.84kWh + 1 BDU control unit with base
Chemistry LiFePO4 (lithium iron phosphate)
Rated energy 11.52kWh (3 x 3.84kWh)
Rated system voltage 288V (3 modules of 96V in series)
Rated capacity 40Ah
Depth of discharge (DoD) 95%
Charge and discharge rate 1C (up to 11520W)
Modules per tower From 2 to 6, 3 here
Towers in parallel Up to 12
Maximum system capacity 276.48kWh
Module configuration Automatic, stacking
Protection rating IP54
Updates and monitoring Over-the-air (OTA)
Weight 151.5kg (28.5kg for base with BDU, 41kg per module)

You might also like these products: