
Deye SE-G5.1 Pro-B Rack Battery LiFePO4 5.12kWh 51.2V
The Deye SE-G5.1 Pro-B is a 5.12kWh LiFePO4 battery at 51.2V in rack format, 133 mm high and 440 mm wide, designed for cabinets and technical rooms. It is the module you build modular storage banks with for homes, offices and small businesses: start with one shelf and add modules as demand grows.
The integrated BMS handles protection and balancing and talks to the inverter over CAN 2.0 and RS485; paralleling reaches 64 units (32 without external setup) for more than 320kWh of system capacity. The cells are rated for over 6000 cycles at 70% remaining capacity and 16 MWh of total energy throughput, with a 10-year warranty and a certification list including CEI 0-21, IEC 62619, VDE 2510-50 and UL 9540. It pairs with Deye 48V low-voltage hybrid inverters.
Key features
Technical specifications
| Feature | Value |
|---|---|
| Product code | SE-G5.1 Pro-B |
| Nominal energy | 5.12kWh |
| Nominal capacity | 100Ah |
| Nominal voltage | 51.2V |
| Voltage range | 43.2-57.6V |
| Cell chemistry | LiFePO4 (lithium iron phosphate) |
| Max. continuous charge current | 50A continuous, 100A peak for 2 minutes at 25 °C |
| Max. continuous discharge current | 50A continuous, 150A peak for 2 minutes at 25 °C |
| Cycle life | >= 6000 cycles (25 °C, 70% EOL) |
| Recommended DoD | 90% |
| Energy throughput | 16 MWh |
| BMS | Integrated BMS with full protection and cell balancing |
| Communication | CAN 2.0 and RS485 |
| Scalability | Up to 64 units in parallel (32 without external setup), over 320kWh of system capacity |
| Protection degree | IP20 |
| Charge temperature | 0 to +55 °C |
| Discharge temperature | -20 to +55 °C |
| Dimensions (W x H x D) | 440 x 133 x 540 mm |
| Weight | 45 kg |
| Certifications | UN38.3, IEC 62619, CE, CB, UKCA, VDE 2510-50, CEI 0-21, FCC, UL 1973, UL 9540, UL 9540A |
| Warranty | 10 years |
Documentation
PDFBrochure SE-G5.1 Pro-BOfficial manufacturer documentPDFManuale utenteOfficial manufacturer documentPDFDeye battery brochureOfficial manufacturer documentInstallation and wiring must be carried out by qualified personnel in accordance with the applicable standards and the electrical design of the system.