
A metering socket with remote control for every washer and dryer: the power draw shows which machine is idle, which is running and which has finished. Plus water leaks, footfall, an SOS button, the door and the climate of the room. LoRaWAN radio transmission, data and commands from the app.
What it does
- Every machine is connected to the mains through an in-line socket that measures voltage, current, power and kWh and transmits them to the gateway; the sending interval can be set from 1 minute upwards.
- The power draw reveals the state of the machine: a few watts at rest, full load during the cycle, back to rest when the cycle is over. With the thresholds set on the platform you can see remotely which machines are free and which are busy, and count the cycles of each one.
- A machine that has drawn nothing for days, or that draws power abnormally, stands out immediately: it is the sign of a fault, of a jammed coin box or of a machine that customers avoid.
- Every socket can be switched on and off from the app: to take a faulty machine out of service or to cut power to all of them at closing time. An adjustable overcurrent protection disconnects the load above the threshold.
- The three floor detectors warn at the first presence of water and sound on the spot; the temperature and humidity sensor monitors the climate of the room and how well the ventilation works while the dryers are running.
- The people counter at the entrance records entries and exits by time slot: it is an indicative footfall figure, with accuracy up to 80%.
- The SOS button sends an immediate notification to the operator or to whoever is on call, not to the police; the contact on the door reports openings outside business hours.

How it is installed
What is in the kit

| Qty | Device | What it is for |
|---|---|---|
| 1 | Compact indoor LoRaWAN gateway | Collects the data from the sensors and forwards the commands to the sockets. Ethernet or Wi-Fi, USB-C power supply at 5 V. |
| 12 | Schuko 16 A in-line socket with consumption metering and remote control | One per machine: power and energy, status from the power draw profile, switching on and off from the app. |
| 3 | Compact water leak detector with buzzer, IP67 | Water on the floor in front of the washers, from 0.5 mm. |
| 1 | Temperature and humidity sensor, IP67 | Climate of the room while the dryers are running. |
| 1 | Passive infrared passage people counter | Entries and exits by time slot, indicative figure. |
| 1 | SOS button | Immediate notification to the operator or to the person on call. |
| 1 | Magnetic contact for doors | Door openings outside business hours. |
Milesight devices of the highest quality with the warranty of the manufacturer. Batteries included in the sensors; the sockets are powered from the 230 V mains, the gateway from USB-C at 5 V.
Available sizes
The size is chosen at the top, together with the version and the connectivity. The diagram, the photo and the table above show the «12 machines» size; with the other sizes only the quantities of the devices listed below change, the rest of the kit is identical.
- 8 machines: 8 switched sockets with consumption metering, 2 water leak sensors
- 12 machines: 12 switched sockets with consumption metering, 3 water leak sensors
- 16 machines: 16 switched sockets with consumption metering, 4 water leak sensors
- 24 machines: 24 switched sockets with consumption metering, 6 water leak sensors
In the complete kit the installation material linked to these devices (brackets, chambers, clips, cables, boxes) follows the size chosen. For a different size, write to us from the contacts section.
Available connectivity
- Customer network (Ethernet/Wi-Fi): 1 compact indoor LoRaWAN gateway
- Built-in 4G: 1 compact LoRaWAN gateway with 4G. SIM not included
- Large building: 1 semi-industrial LoRaWAN gateway. Semi-industrial IP65 gateway, PoE: apartment blocks and campsites with the network in another building
In the complete kit the material for the gateway (network cable, pole, PoE injector) changes accordingly. The SIM for the 4G versions is not included.
Choose the version
- The Milesight devices in the table
- Installation guide and initial configuration
- For those who already have a network cable and fixing material
- Everything in the basic version
- 5 m Ethernet cable for the gateway
- Stainless steel bracket to fix a sensor where drilling is not possible
- Pack of 4 spare lithium batteries for the sensors
- Numbered labels for machines and sockets, installation diagram, wall plugs, screws, double-sided tape and cable ties
Before you order
Is an internet connection needed in the laundry?
It is needed at the point where the gateway is installed: a network socket or the Wi-Fi of the premises, for example the one that already serves the till or the cameras. Sockets and sensors do not use Wi-Fi, they talk to the gateway by radio. If there is no line on the premises, the version with a 4G gateway is available, which requires a data SIM (not included, any operator, less than 1 GB of traffic per month). It is chosen when ordering.
What is the radio coverage?
In a single-room laundry the gateway covers all the machines without difficulty. Inside a building the range depends on walls and floors: the gateway should go in a central position. If the laundry is in the basement of an apartment block or in the service block of a campsite and the network only reaches another building, the options include the «large building» version, with a gateway of greater range, IP65 and able to be powered via PoE.
Which machines does it work with?
With single-phase washers and dryers connected to a Schuko socket and drawing up to 16 A. Three-phase professional machines, those with an industrial plug and those above 16 A cannot be connected to these sockets: for them, clamp current meters in the electrical panel are used, without remote control. Write to us from the contacts section with the models of the machines. Washers, dryers and the till are not included.
How can you tell whether a machine is free or has finished?
From the power. At rest a machine draws a few watts, during the cycle from hundreds to thousands, at the end of the cycle it goes back to rest. The sockets send the reading at intervals adjustable from 1 minute and on the platform you set the thresholds that separate the three states. The thresholds depend on the model of machine: the initial configuration is included and is fine-tuned from the app after the first few days of operation.
Can I switch off a machine remotely?
Yes, every socket is controlled from the app. Switching off cuts power to the machine: it is to be used when the machine is idle, to put it out of service or at closing time. During a cycle it would leave the load wet and the door locked. The command goes through the gateway and takes a few seconds.
I have more or fewer than 12 machines, or several laundries
The kit is configured on the premises: one socket per machine, gateway and platform stay the same. Among the options of the product you will find the 8 and 16 machine sizes; for several outlets each laundry has its own gateway and the platform stays the same. Write to us from the contacts section stating the number and models of the machines and the number of premises: we will send you the composition and the quote of the adapted kit.
Battery life
The sockets have no battery. The temperature and humidity sensor reaches up to 10 years with one reading every 10 minutes at 25 °C; the leak detectors more than 5 years with a button cell; the people counter about 4 years with 1,000 passages a day; the SOS button more than 7 years; the door contact about 5. The charge level is visible in the app.
Where is the data consulted and are there any fees?
On the app and on the portal of the manufacturer, from smartphone and PC, with charts, thresholds and notifications; no fee for basic use. Where there is a management system or the software of the payment system, the gateway can also send the data to that system (MQTT or HTTP): the configuration is included.
What happens if the internet goes down?
The machines keep working: the sockets stay in the state they are in and are operated by hand from the button. As long as the line is down, neither notifications nor remote commands arrive. The people counter stores up to 1,000 records and retransmits them when the connection comes back; the leak detectors sound on the spot anyway.
Is an electrician necessary? Do they withstand the humidity of the room?
No electrician is needed: the sockets simply plug in and the sensors are battery powered. Leak detectors and the temperature and humidity sensor are IP67. Sockets, people counter, button, contact and gateway are for dry indoor use, from IP20 to IP30: they must be kept away from splashes, direct steam and wet floors. The wall sockets must already be rated for the load of the machines.
What is not included
- Washers, dryers, till and coin boxes: these are the ones in your laundry
- The data SIM, in the version with the 4G gateway
- The wall sockets and the electrical system of the premises
- In the "devices only" version: network cable, bracket, spare batteries, labels and fixing material
Shipping
Shipping: free in Italy and throughout the EU. Delivery in 10-20 working days.