Dyness

Dyness Tower Pro 3.84kWh 96V High Voltage LiFePO4 Battery Module

Name: Dyness Tower Pro 3.84kWh 96V High Voltage LiFePO4 Battery Module
Brand: Dyness
SKU: DY-TOWER-PRO-BATT
Price: 671.76 EUR
Availability: InStock

€671.76

Sale Sold out Excl. VAT — calculated in the cart175 €/kWh

See the price with VAT

Price including VAT by delivery country

Italy22% €819.54
Germany19% €799.39
France20% €806.11
Austria20% €806.11
Belgium21% €812.82
Bulgaria20% €806.11
Croatia25% €839.70
Cyprus19% €799.39
Czech Republic21% €812.82
Denmark25% €839.70
Estonia24% €832.98
Finland25.5% €843.05
Greece24% €832.98
Hungary27% €853.13
Ireland23% €826.26
Latvia21% €812.82
Lithuania21% €812.82
Luxembourg17% €785.95
Malta18% €792.67
Netherlands21% €812.82
Poland23% €826.26
Portugal23% €826.26
Romania21% €812.82
Slovakia23% €826.26
Slovenia22% €819.54
Spain21% €812.82
Sweden25% €839.70

Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).

See the shipping cost

Pallet shipping by country

up to 500 kgup to 750 kg

Italy230 € 320 €
Austria230 € 320 €
Belgium230 € 320 €
Czech Republic230 € 320 €
Denmark230 € 320 €
France230 € 320 €
Germany230 € 320 €
Luxembourg230 € 320 €
Netherlands230 € 320 €
Poland230 € 320 €
Spain230 € 320 €
Bulgaria320 € 410 €
Croatia320 € 410 €
Estonia320 € 410 €
Finland320 € 410 €
Greece320 € 410 €
Hungary320 € 410 €
Ireland320 € 410 €
Lithuania320 € 410 €
Portugal320 € 410 €
Romania320 € 410 €
Slovakia320 € 410 €
Slovenia320 € 410 €
Sweden320 € 410 €
Latvia320 € 329.24 €
Maltaon request
Cypruson request

The price does not include shipping. Goods travel on a pallet with a dedicated carrier: half pallet up to 500 kg, full pallet up to 750 kg. Above 750 kg the cart adds the further pallets on its own. The exact amount is shown in the cart.

Shipping not included

804 units at this price

Compare

Product variants

Quantity

Configure your system in two minutes Pick the inverter and get the batteries it accepts, modules per string, switchboards, price per kWp and a cart ready to check out. Open the configurator →

See our resellers Become a distributor or reseller Contact us

Prices exclude VAT: tax is calculated in the cart based on the delivery country.
EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.

View full details

Delivery in 10-20 daysDyness

Dyness Tower Pro 3.84kWh 96V High Voltage LiFePO4 Battery Module

The Dyness Tower Pro 3.84kWh is the building block of the Tower Pro high voltage storage column. It does not work on its own: identical modules are stacked to form the battery tower that banks the energy your solar array produces during the day and gives it back in the evening, or when the grid drops. Each module holds 3.84kWh at 96V and identifies itself inside the stack automatically, so there are no addresses or DIP switches for the installer to set.

A tower takes 2 to 6 modules and is completed by the Tower Pro BDU control unit and its base, both ordered separately. The BDU handles the link to the high voltage hybrid inverter, carries the LED status indication and enables over-the-air monitoring and firmware updates. When one tower is not enough, up to 12 towers run in parallel for a total of 276.48kWh — the same module therefore serves a large home and a small business alike.

Charging is rated up to 3840W, a full 1C, so the tower fills up during the strongest hours of sunshine instead of trickling all day. The declared depth of discharge is 95%, which leaves almost all of the 3.84kWh nominal capacity genuinely usable. The IP55 enclosure allows both indoor and outdoor installation. Installation and commissioning must be carried out by qualified personnel, in line with local regulations and the manufacturer’s instructions.

Key strengths

3.84kWh per module96V high voltage module rated 40Ah, with a 95% depth of discharge.

2 to 6 modules per towerModules stack and self-configure — no manual addressing.

Up to 276.48kWhUp to 12 towers in parallel cover a home, a shop or a company.

1C fast chargingUp to 3840W charge power: the tower refills while the sun is at its peak.

IP55 and OTA updatesProtected enclosure and remote firmware updates through the BDU.

Technical specifications

Feature	Value
Product code	DY-TOWER-PRO-BATT
Manufacturer	Dyness
Series	Tower Pro
Type	High voltage battery module
Chemistry	LiFePO4 (lithium iron phosphate)
Nominal energy	3.84kWh (3840Wh)
Nominal voltage	96V
Nominal capacity	40Ah
Depth of discharge (DoD)	95%
Continuous discharge power	3840W
Maximum discharge power (5 minutes)	3840W
Peak power (15 seconds)	3840W
Maximum charge power (5 minutes)	3840W
Modules per tower	2 to 6
Towers in parallel	Up to 12
Maximum system capacity	276.48kWh
Control unit	Tower Pro BDU with base (ordered separately)
Ingress protection	IP55
Weight	41kg
Updates and monitoring	Over-the-air (OTA)