AIKO documentation – A440-MAH54Mw Neostar 2P
AIKO Solar · Technical documentation
AIKO A440-MAH54Mw – Neostar 2P
An ordered collection of the technical documentation and certifications available for the AIKO-Axxx-MAH54Mw family, which includes the 440W model.
Note: some documents refer to the AIKO-Axxx-MAH54Mw product family and explicitly cover the AIKO-A440-MAH54Mw model. Batch-specific documents (flash report, EL images and serial numbers) are linked to the pallet allocated.
Product certifications
AIKO CE declaration of conformity
Covers the AIKO-Axxx-MAH54Mw family. It lists IEC 61215-1:2021, IEC 61215-1-1:2021, IEC 61215-2:2021, IEC 61730-1:2023, IEC 61730-2:2023 and EN IEC 61730-1/-2:2018.
Download PDFTÜV Rheinland certification – AIKO-Axxx-MAH54Mw
Certification for the AIKO-Axxx-MAH54Mw family, with a power range that includes the AIKO-A440-MAH54Mw model.
Download PDFMCS Certificate – AIKO-A440-MAH54Mw
MCS certificate referring explicitly to the AIKO-A440-MAH54Mw model.
Download PDFManufacturer's warranty
AIKO N-Type ABC warranty
Warranty document applicable to the AIKO-Axxx-MAH54Mw family. AIKO's documentation gives 15 years product warranty and 30 years linear performance warranty for this family.
Download PDFFactory and management systems
ISO 9001 · ISO 14001 · ISO 45001
AIKO's management system certifications: quality, environment and occupational health and safety.
Open ISO documentationTÜV – Test Reports & Certificates
TÜV test reports and certificates for the AIKO modules.
Open TÜV collectionSupply chain and forced labour
AIKO Supplier Code of Conduct
Official AIKO document setting out the requirements placed on suppliers, including the ban on forced labour, slavery, bonded labour and human trafficking.
Download PDFAIKO Human Rights Management Policy
AIKO's official policy on human rights and supply chain management.
Download PDFBatch-specific documentation
The following documents are not generic certifications you can download publicly, because they have to relate to the modules actually allocated to the supply:
- flash report for each individual module;
- electroluminescence (EL) test report with an image of the individual module;
- list of the pallet's serial numbers;
- any Bill of Materials / CDF relating to the production run;
- the full Factory Inspection Report where a competent authority requires it.
This page brings together technical documentation obtained from the manufacturer's own sources and from AIKO technical and distribution channels. The validity and applicability of each document must be assessed against the product code and the batch actually supplied.