Felicity Solar
Low voltage storage battery Felicity FLA48100UG1 5.12kWh LiFePO4 wall, rack or stackable
Low voltage storage battery Felicity FLA48100UG1 5.12kWh LiFePO4 wall, rack or stackable
Regular price
€806.25
Regular price
Sale price
€806.25
Unit price
per
See the price with VAT
Price including VAT by delivery country
- Italy22% €983.62
- Germany19% €959.43
- France20% €967.50
- Austria20% €967.50
- Belgium21% €975.56
- Bulgaria20% €967.50
- Croatia25% €1,007.81
- Cyprus19% €959.43
- Czech Republic21% €975.56
- Denmark25% €1,007.81
- Estonia24% €999.75
- Finland25.5% €1,011.84
- Greece24% €999.75
- Hungary27% €1,023.93
- Ireland23% €991.68
- Latvia21% €975.56
- Lithuania21% €975.56
- Luxembourg17% €943.31
- Malta18% €951.37
- Netherlands21% €975.56
- Poland23% €991.68
- Portugal23% €991.68
- Romania21% €975.56
- Slovakia23% €991.68
- Slovenia22% €983.62
- Spain21% €975.56
- Sweden25% €1,007.81
Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).
Couldn't load pickup availability
- Prices exclude VAT: tax is calculated in the cart based on the delivery country.
- EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
- Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.
AVAILABILITY
Product available, quantity not tracked
Shipping
- Italy: €13 on orders up to €150, free shipping over €150.
- European Union: 60 € per order, with no threshold
Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.
Delivery in 10-20 daysBatteryFelicity
Low voltage storage battery Felicity FLA48100UG1 5.12kWh LiFePO4 wall, rack or stackable
The Felicity FLA48100UG1 is a 51.2V / 100Ah LiFePO4 storage module rated 5.12kWh, designed for residential PV systems built around 48V low-voltage inverters. It stores energy from the solar array or the grid and feeds household loads whenever needed, including during a blackout.
What sets it apart is installation freedom: the very same module can be wall-mounted, stacked with other modules or slotted into a rack. A smart BMS with built-in breaker and fuse, an on-board aerosol fire extinguisher and CAN and RS485 communication make it suitable both as a single pack and in systems of up to 163.84kWh with 32 units in parallel. IP21 protection for indoor use and a 7-year warranty.
Key features
5.12kWh moduleA single 51.2V / 100Ah LiFePO4 pack delivers 5.12kWh of nominal energy with 100A continuous charge and discharge current.
Three ways to install itWall-mounted, stacked or rack-mounted: the same module fits plant rooms, garages and rack cabinets without different accessories.
Expandable up to 163.84kWhUp to 32 units in parallel for high-capacity systems, with CAN and RS485 communication towards the leading inverter brands.
Layered safetySmart BMS, built-in breaker and fuse, on-board aerosol fire extinguisher and ≥6000 cycles of service life with ≥95% DOD.
Technical specifications
| Feature | Value |
|---|---|
| Product code | FLA48100UG1 |
| Model | FLA48100UG1 |
| Series | FLA – low-voltage battery pack |
| Battery type | LiFePO4 (lithium iron phosphate) |
| Nominal energy | 5.12kWh |
| Nominal capacity | 100Ah |
| Nominal voltage | 51.2V |
| Operating voltage range | 44.8–57.6V |
| Max. continuous charge/discharge current | 100A |
| Depth of discharge (DOD) | ≥95% |
| Cycle life | ≥6000 cycles (25 °C ±2 °C, 0.5C/0.5C, 90% DOD, 70% EOL) |
| Scalability | up to 32 units in parallel (163.84kWh) |
| Communication | CAN. RS485 |
| Protection level | IP21 |
| Installation | stackable, rack or wall-mounted |
| Intended use | indoor use |
| Built-in protections | built-in smart BMS, breaker and fuse |
| Fire suppression system | built-in aerosol fire extinguisher |
| Warranty | 7 years |
Documentation
PDFDatasheet FLA48100UG1 (EN)Official manufacturer documentPDFManuale utente FLA48100UG1 (EN)Official manufacturer documentPDFGuide utilisateur FLA48100UG1 (FR)Official manufacturer documentInstallation and wiring must be carried out by qualified personnel in accordance with the applicable standards and the electrical design of the system.