
Businesses and non-Italian private customers: purchase with 22% VAT. The 10% rate is reserved for private customers resident in Italy — find out more.
Foreign companies entitled to 0% VAT: please write to info@litio.store.
Low voltage storage battery Felicity FLA48100UG1 5.12 kWh LiFePO4 wall, rack or stackable
The Felicity FLA48100UG1 is a 51.2 V / 100 Ah LiFePO4 storage module rated 5.12 kWh, designed for residential PV systems built around 48 V low-voltage inverters. It stores energy from the solar array or the grid and feeds household loads whenever needed, including during a blackout.
What sets it apart is installation freedom: the very same module can be wall-mounted, stacked with other modules or slotted into a rack. A smart BMS with built-in breaker and fuse, an on-board aerosol fire extinguisher and CAN and RS485 communication make it suitable both as a single pack and in systems of up to 163.84 kWh with 32 units in parallel. IP21 protection for indoor use and a 7-year warranty.
Key features
Technical specifications
| Feature | Value |
|---|---|
| Product code | FLA48100UG1 |
| Model | FLA48100UG1 |
| Series | FLA – low-voltage battery pack |
| Battery type | LiFePO4 (lithium iron phosphate) |
| Nominal energy | 5.12 kWh |
| Nominal capacity | 100 Ah |
| Nominal voltage | 51.2 V |
| Operating voltage range | 44.8–57.6 V |
| Max. continuous charge/discharge current | 100 A |
| Depth of discharge (DOD) | ≥95% |
| Cycle life | ≥6000 cycles (25 °C ±2 °C, 0.5C/0.5C, 90% DOD, 70% EOL) |
| Scalability | up to 32 units in parallel (163.84 kWh) |
| Communication | CAN. RS485 |
| Protection level | IP21 |
| Installation | stackable, rack or wall-mounted |
| Intended use | indoor use |
| Built-in protections | built-in smart BMS, breaker and fuse |
| Fire suppression system | built-in aerosol fire extinguisher |
| Warranty | 7 years |
Documentation
PDFDatasheet FLA48100UG1 (EN)Official manufacturer documentPDFManuale utente FLA48100UG1 (EN)Official manufacturer documentPDFGuide utilisateur FLA48100UG1 (FR)Official manufacturer documentInstallation and wiring must be carried out by qualified personnel in accordance with the applicable standards and the electrical design of the system.