Victron Energy Phoenix Smart 1600 VA Inverter – 12V / 24V

Delivery in 1–3 weeks

Victron Phoenix Smart 1600 VA Inverter

The Victron Energy Phoenix Smart is a 1600 VA pure sine wave inverter with built-in Bluetooth for monitoring and control from a smartphone or tablet.

Built-in Bluetooth: fully configurable from a tablet or smartphone

• Low battery voltage alarm
• Low battery voltage shutdown and restart thresholds, with a load-dependent dynamic cut-off
• Output voltage: 210–245V
• Frequency: 50 Hz or 60 Hz
• ECO mode on/off and load detection threshold
• Alarm relay

Monitoring:

• Input and output voltage, load and alarms

VE.Direct communication port

The VE.Direct port can connect to a computer using a VE.Direct-to-USB interface cable to configure and monitor the same settings.

Proven reliability

The toroidal transformer design has proved its reliability over many years. The inverters are protected against short circuits and overheating caused by either overload or high ambient temperature.

High starting power

Provides the starting power needed by loads such as LED lamp power converters, halogen lamps and power tools.

ECO mode

In ECO mode, the inverter enters standby when the load falls below a preset threshold. While in standby, it briefly switches on every 2.5 seconds; this interval is adjustable. If the load exceeds the preset threshold, the inverter stays on.

Remote on/off

A remote on/off switch or relay contact can be connected to the two-pole connector.
Alternatively, the H terminal (left) of the two-pole connector can be switched to battery positive, or the L terminal (right) can be switched to battery negative, such as a vehicle chassis.

Download technical specifications (PDF)