Marstek
Marstek Mars I Plus stackable high-voltage battery module 5.12kWh LiFePO4
Marstek Mars I Plus stackable high-voltage battery module 5.12kWh LiFePO4
Regular price
€1,312.50
Regular price
Sale price
€1,312.50
Unit price
per
See the price with VAT
Price including VAT by delivery country
- Italy22% €1,601.25
- Germany19% €1,561.87
- France20% €1,575.00
- Austria20% €1,575.00
- Belgium21% €1,588.12
- Bulgaria20% €1,575.00
- Croatia25% €1,640.62
- Cyprus19% €1,561.87
- Czech Republic21% €1,588.12
- Denmark25% €1,640.62
- Estonia24% €1,627.50
- Finland25.5% €1,647.18
- Greece24% €1,627.50
- Hungary27% €1,666.87
- Ireland23% €1,614.37
- Latvia21% €1,588.12
- Lithuania21% €1,588.12
- Luxembourg17% €1,535.62
- Malta18% €1,548.75
- Netherlands21% €1,588.12
- Poland23% €1,614.37
- Portugal23% €1,614.37
- Romania21% €1,588.12
- Slovakia23% €1,614.37
- Slovenia22% €1,601.25
- Spain21% €1,588.12
- Sweden25% €1,640.62
Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).
Couldn't load pickup availability
- Prices exclude VAT: tax is calculated in the cart based on the delivery country.
- EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
- Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.
AVAILABILITY
Product available, quantity not tracked
Shipping
- Italy: €13 on orders up to €150, free shipping over €150.
- European Union: 60 € per order, with no threshold
Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.
Delivery in 10-20 daysBatteryMarstek
Marstek Mars I Plus stackable high-voltage battery module 5.12kWh LiFePO4
This is the 5.12kWh battery module of the Marstek Mars I Plus storage system: automotive-grade LFP cells in a stackable, plug-and-play pack designed to work with the Mars I Plus hybrid inverter in a V-Boost high-voltage configuration of up to 1000V. Real-time cell balancing prevents the weakest module from limiting the whole pack.
Capacity is built to measure: start with one module and grow to six modules for 30.72kWh per system, or up to 122.88kWh by paralleling four Mars I Plus systems. The cells exceed 10,000 cycles while keeping 80% of their capacity for up to 15 years, with a 10-year warranty. IP65 enclosure with fire- and heat-resistant materials, operation from -25 to 60 °C and noise below 30 dB.
Key features
5.12kWh per moduleAutomotive-grade LFP battery pack, stackable and plug-and-play, added whenever more capacity is needed.
From 5.12 to 30.72kWhUp to six modules per system, and up to 122.88kWh by paralleling four Mars I Plus systems.
V-Boost high voltageConfiguration up to 1000V with real-time cell balancing: no barrel effect between modules.
Over 10,000 cycles80% capacity retention for up to 15 years of service, backed by a 10-year warranty.
Technical specifications
| Feature | Value |
|---|---|
| Product code | Mars I plus ESS battery |
| Product type | Battery module for the Mars I Plus storage system |
| Rated capacity per module | 5.12kWh |
| Cell chemistry | Automotive-grade LFP (lithium iron phosphate) |
| Expandability per system | 5.12kWh to 30.72kWh (maximum 6 modules) |
| Parallel expandability | up to 122.88kWh with 4 Mars I Plus systems |
| Architecture | V-Boost high voltage up to 1000V |
| Cell balancing | real time, at individual cell level |
| Cycle life | > 10,000 cycles |
| Capacity retention | 80% for up to 15 years |
| Installation | Modular, stackable, plug-and-play |
| Ingress protection | IP65 |
| Materials | fire and high-temperature resistant |
| Operating temperature | -25 °C to +60 °C |
| System noise level | < 30 dB |
| Compatibility | Marstek Mars I Plus hybrid inverter (single-phase and three-phase) |
| Warranty | 10 years |
Documentation
PDFMarstek Mars I Plus - Product Introduction (PDF)Official manufacturer documentPDFMarstek Mars I Plus Three-Phase - Brochure (PDF)Official manufacturer documentInstallation and wiring must be carried out by qualified personnel in accordance with the applicable standards and the electrical design of the system.