Milesight
Smart home kit for common areas, swimming pool and technical rooms LoRaWAN Milesight: footfall, air quality, pool water, flooding, natural gas, toilets and SOS
Smart home kit for common areas, swimming pool and technical rooms LoRaWAN Milesight: footfall, air quality, pool water, flooding, natural gas, toilets and SOS
Regular price
€2,426.23
Regular price
Sale price
€2,426.23
Unit price
per
Couldn't load pickup availability
- Prices exclude VAT: tax is calculated in the cart based on the delivery country.
- EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
- Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.
AVAILABILITY
Product available, quantity not tracked
Shipping
- Italy: €13 on orders up to €150, free shipping over €150.
- European Union: 60 € per order, with no threshold
Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.
Hotel kit · common areas and technical rooms
Kit for common areas, swimming pool and technical rooms for a medium-sized property
Footfall in the breakfast room, air quality in the function rooms, temperature of the pool water, flooding in the technical rooms, natural gas in the boiler room, noise in the lounge, occupancy of the shared toilets and SOS buttons for the pool and the spa. LoRaWAN radio transmission, data and alarms from the app.
Milesight devices
A single system for the whole property
No cameras
Alarms on your smartphone
Customisable kits. This is one of the Milesight LoRaWAN kits in the Smart Home section. For different installations, custom kits or bespoke automations, write to us from the contacts section.
Rooms and footfallTwo people counters on the entrances and two air monitors with CO2, fine particulate and volatile compounds.
Pool waterPT100 probe on the recirculation circuit, accuracy of ±0.6 °C, one reading every 10 minutes.
Technical roomsWater-sensing cable around the balance tank and the boiler, methane detector in the boiler room.
Toilets and SOSOccupancy of 4 shared toilets and 2 red emergency buttons for the pool and the spa.
What it does
- The two ceiling people counters count entries and exits at two passages, for example the breakfast room and the entrance to the spa. They use a low-resolution thermal sensor, with no images, with a declared accuracy of up to 90%: you can see at what time the room fills up and when to reinforce the buffet or the staff.
- The two air monitors measure CO2, PM2.5 and PM10 particulate, volatile organic compounds, temperature, humidity, pressure and light. A display, a light indicator and a buzzer warn on the spot; above the threshold the notification reaches maintenance.
- The PT100 probe measures the water temperature on the pool recirculation circuit and transmits it every 10 minutes: a heat exchanger at a standstill or a heat pump that has tripped can be seen on the graph before the guests notice.
- The two water-sensing cables, 3 m long, are laid on the floor along the balance tank and around the boiler: the alarm is raised as soon as water touches the cable at any point. The same sensor measures the temperature and the humidity of the room.
- The methane detector in the boiler room sounds on the spot at 85 dB and sends the alarm to the app. It has a relay output and a 12 V pulse output for a gas shut-off valve.
- The sound level sensor records the noise in the lounge, from 30 to 120 dB: it is used to manage music and evening events and to answer complaints with data.
- The sensors in the shared toilets show free or occupied and record the uses, so that cleaning follows actual use. The red SOS buttons send the call to the staff together with the location.
For more rooms or more passages to count, a second pool or whirlpool tubs, boiler rooms not running on natural gas, extended technical rooms, properties spread over more than one building, or if a 4G gateway or one with greater range is needed: tell us the characteristics of your property from the contacts section and we will propose the correct configuration together with the quotation.
1Compact indoor LoRaWAN gateway, at reception or in the back office, connected to the property network: it collects the data from all the sensors and takes it to the cloud.
2Ceiling people counter above the passage. Two in the kit.
3Air quality monitor with display, on the wall at least 1.5 m above the floor. Two in the kit: breakfast room and meeting room.
4Temperature sensor with PT100 probe in a thermowell on the pool circuit, in the technical room.
5Flood sensor with a 3 m sensing cable on the floor. Two in the kit: balance tank and boiler.
6Methane detector in the boiler room, on the wall, 10-30 cm below the ceiling.
7Sound level sensor in the lounge.
8Ceiling occupancy sensor in the shared toilets. Four in the kit.
9Red SOS button, on the wall in a position sheltered from splashes. Two in the kit: pool area and spa.
How it is installed
Gateway. At reception, in the back office or in a central technical room, high up and away from metal masses. It stands on a shelf or is fixed to the wall or the ceiling with the supplied plate. It is an indoor unit, IP30, operation from -20 to +50 °C: it must not go in the pool room or in the boiler room. USB-C 5 V/2 A power supply, connection to the network with an Ethernet cable or Wi-Fi. If the technical rooms and the pool are in a basement or in a separate block, choose the «large building» version.
Rooms: people counters, air and noise. People counter on the ceiling or on the lintel, facing the floor, at a height of 2 to 3 m: it covers a passage of 1.6 m at a height of 2 m, about 2.6 m at 2.4 m, 3.6 m at 3 m. Away from air vents, air conditioners and heat sources, with no metal objects underneath. Air monitor on the wall at least 1.5 m above the floor, not next to doors, windows and draughts, with a USB socket nearby. Noise sensor at a height of 1.2-1.5 m, at least 1 m from reflecting surfaces and about 1.5 m from doors and windows, not right up against the speakers.
Pool and technical rooms. The PT100 probe, 4 mm in diameter, 30 mm long and with a 1.5 m cable, is inserted into a thermowell on the recirculation pipe; the body of the sensor, IP67, is fixed to the wall or to a pipe with a clamp, where the temperature stays between -30 and +70 °C. The sensing cables are laid on the floor along the edge of the balance tank and around the boiler, held with clips or cable ties, never with glue or metal parts, out of the walkways; the connector must be kept dry. The cable cannot be extended.
Gas, toilets and SOS buttons. Gas detector on the wall, 10 to 30 cm below the ceiling and at a distance of 1.5 to 4 m from the boiler, not next to doors, windows and ventilation openings; it is powered from a socket with the supplied 12 V power supply. Toilet sensors on the ceiling, at a height of 2.5 to 3 m, facing the front of the pan and with their centre 10-20 cm from the centre of the pan, away from water. SOS buttons on the wall with screws or double-sided tape, clearly visible but sheltered from splashes and condensation: they are indoor devices, IP30, and they must not go in a sauna or a steam room.
Configuration. By NFC with a smartphone and the manufacturer's free app: thresholds for water temperature, CO2 and noise, names of the rooms, recipients of the SOS calls. The gateway is configured from a browser. No cables and no paid software are needed.
Documentation included. A written installation guide with heights, distances and positions for every device, instructions for the probe thermowell and the route of the sensing cables, and the initial configuration of thresholds, room names and alarm recipients given when ordering.
What is in the kit
| Qty | Device | What it is for |
|---|---|---|
| 1 | Compact indoor LoRaWAN gateway, Ethernet and Wi-Fi | It collects the data from the sensors and sends it to the cloud through the property network. |
| 2 | Bidirectional people counter with thermal sensor | Entries and exits at two passages, with no images. |
| 2 | Air quality monitor with 9 parameters and display | CO2, PM2.5, PM10, volatile compounds, temperature, humidity, pressure, light and movement in the room. |
| 1 | Temperature sensor with PT100 probe, IP67 | Water temperature on the pool circuit, from -50 to +200 °C. |
| 2 | Flood sensor with 3 m sensing cable, IP67 | Water on the floor along the balance tank and the boiler, plus the temperature and the humidity of the room. |
| 1 | Methane detector, with relay and output for a shut-off valve | Audible alarm and notification in the event of a leak in the boiler room. |
| 1 | Sound level sensor, 30-120 dB | Noise in the lounge: instantaneous, average and maximum level. |
| 4 | Occupancy sensor for toilets | Free or occupied and uses of the shared toilets. |
| 2 | Red wireless SOS button | Emergency call from the pool area and the spa. |
Milesight devices of the highest quality with the manufacturer's warranty. Batteries included in the battery-powered sensors; the gas detector and the gateway are mains powered, and for the air monitors permanent USB-C 5 V power is recommended.
Available connectivity
- Customer network (Ethernet/Wi-Fi): 1 compact indoor LoRaWAN gateway
- Built-in 4G: 1 compact LoRaWAN gateway with 4G. SIM not included
- Large building: 1 semi-industrial LoRaWAN gateway
In the complete kit the material for the gateway (network cable, pole, PoE injector) changes accordingly. The SIM for the 4G versions is not included.
Choose the version
Devices only
The price updates at the top when you choose version, connectivity and size.
- The Milesight devices in the table
- Installation guide and initial configuration
- For those who already have a thermowell for the probe, a network cable, sockets near the powered devices and fixing material
Recommended
Complete kit with installation material
The price updates at the top when you choose version, connectivity and size.
- Everything in the basic version
- 1/2" stainless steel thermowell for the probe on the pool circuit, with clips and fixing ties
- Stainless steel clamp to fix the temperature sensor to a pipe or a pole
- Material for the 230 V supply of the gas detector: modular breaker, box, cable and terminals
- 5 m network cable for the gateway
- Wall plugs, screws, double-sided tape, cable ties, numbered labels and installation diagram
Before you order
Is an internet connection needed?
It is needed at the point where the gateway is installed: a network socket or the Wi-Fi coverage of the property. The sensors do not use the guest Wi-Fi, they talk by radio with the gateway. If you prefer to keep the system separate from the hotel network, the version with a 4G gateway is available, which requires a data SIM (not included, any operator, less than 1 GB of traffic per month). It is chosen when ordering.
Does one gateway cover the rooms, the pool and the boiler room in the basement?
LoRaWAN radio passes through walls and floor slabs far better than Wi-Fi, but the range inside a building depends on walls, slabs and metal structures: the gateway goes in a central position and high up. With underground technical rooms, a pool in a separate block, thick walls or many floors, choose the «large building» version among the options, with a gateway of greater range, IP65 and able to be powered over PoE. For resorts spread over several buildings, write to us from the contacts section. One gateway handles hundreds of devices.
How is the temperature of the pool water measured?
With a PT100 probe inserted into a thermowell on the recirculation pipe, in the technical room: the measurement is that of the water coming back from the pool. The thermowell, included in the complete kit, has a 1/2" threaded connection and requires a boss on the pipe: this is a job for a plumber or for the pool maintenance technician. The kit measures the temperature; chlorine, pH and other chemical parameters are not included.
Do the people counters film the guests? How accurate are they?
They have no camera: they use a thermal sensor with just a few points, which sees heat outlines and produces no images. The manufacturer declares an accuracy of up to 90%, which depends on the mounting height and on the height of the people. The data is there to read the trend in footfall, not to count the breakfasts served.
Can the SOS button be at the edge of the pool?
The button is an indoor device, with IP30 protection: it goes on the wall in the pool area or in the spa, clearly visible but sheltered from splashes and condensation, not at the edge of the pool, not in a sauna or a steam room. The call arrives as a notification to the staff and needs the internet connection: it is extra help, it does not replace lifeguard supervision or the alarm systems required by the regulations.
My boiler room does not run on natural gas
The detector measures methane only, that is mains gas: it does not detect LPG or carbon monoxide. With an LPG, oil or heat pump plant room, ask us from the contacts section for the kit without the detector. In any case the detector does not replace the safety devices required by the regulations for the boiler room. The sensing element has a life of 5 years from switch-on, after which the detector must be replaced.
My property is larger or different
The kit is configured on the property: people counters are added for other passages, air monitors for other rooms, sensing cables for other technical rooms, sensors for other toilets; the gateway and the platform stay the same. Write to us from the contacts section stating rooms, passages, toilets, pools and technical rooms: we will send you the composition and the quotation for the adapted kit.
What has to be mains powered? Is an electrician needed?
The gas detector is powered from a socket with its own 12 V power supply. The air monitors also work on batteries, but with the particulate sensor the life is about one year: it is better to power them permanently over USB-C 5 V. The people counters are supplied for USB-C 5 V power or for battery operation depending on the version. An electrician is needed only where there is no socket nearby, or if the outputs of the gas detector are connected to a siren or to a shut-off valve. Everything else is battery powered.
Battery life
The manufacturer states 10 years for the pool temperature sensor and more than 10 years for the flood sensors, with one reading every 10 minutes at 25 °C; 7 to 9 years for the SOS buttons; up to 5 years for the noise sensor; about 3 to 4 years for the toilet sensors. Shorter intervals and a weak signal reduce the life. The batteries are replaceable and the charge level is visible in the app.
Where is the data consulted, are there any fees, and what if the internet is down?
On the manufacturer's app and portal, from a smartphone and a PC, with graphs, thresholds and notifications; no fee for basic use. Where there is a BMS or management software, the gateway can also send the data to that system (MQTT or HTTP): the configuration is included. Without internet the sensors keep measuring; the pool sensor, the air monitors and the people counters keep the readings in memory, to be recovered when the connection comes back. The gas detector and the air monitors also warn on the spot with their buzzer when the network is down; notifications on the smartphone resume when the line is restored.
What is not included
- The boiler, the pool plant and the gas shut-off valve: these are your property's own
- The threaded boss on the pipe for the probe thermowell and its installation
- The USB power supplies for the air monitors and the sockets near the powered devices
- The data SIM, in the version with a 4G gateway
- In the "devices only" version: thermowell, clamp, electrical material, network cable and small fixings
Shipping
Shipping: free in Italy and throughout the EU. Delivery in 10-20 working days.