
Status of the doors of 6 loading bays with open time, passages through the pedestrian entrances, temperature and humidity in the goods areas, water leaks and tilt of the racking uprights. Battery-powered sensors, LoRaWAN radio transmission, data and alerts from the app.
What it does
- A magnetic contact on each door transmits opening and closing immediately: from the platform you see which bays are open and for how long, and you receive a notification when a door stays open beyond the set time or opens outside working hours.
- The same device measures temperature and humidity next to the bay: the data shows how much each door affects the climate of the warehouse.
- The people counters on the pedestrian doors count the passages in both directions. It is an indicative footfall figure, with an accuracy of up to 80%: it serves to read the flows and the times, it is not an access control system.
- Four temperature and humidity sensors watch over the areas with sensitive goods, with one reading every 10 minutes and an alarm when the thresholds are exceeded.
- The leak sensors, resting on the floor under the sprinkler control station and in the toilets, report water already at 0.5 mm with a notification and an on-board buzzer.
- The tilt sensors on the uprights measure the deviation from the position recorded at installation: an upright that stays bent after being hit by a forklift generates an alarm. They do not replace the periodic inspections of the racking.
- History, charts and notifications can be consulted from smartphone and PC.

How it is installed
What is in the kit

| Qty | Device | What it is for |
|---|---|---|
| 1 | Compact indoor LoRaWAN gateway | Collects the sensor data and sends it to the cloud. Customer's Ethernet or Wi-Fi, USB-C 5 V power supply. |
| 6 | Magnetic contact with 1.5 m cable, with temperature and humidity, IP67 | Opening, closing and open time of each door; climate next to the bay. |
| 2 | Passage people counter with dual infrared | Passages in and out of the pedestrian doors, indicative footfall figure. |
| 4 | Temperature and humidity sensor, IP67 | Microclimate of the goods areas, from -30 to +70 °C, with an alarm on threshold. |
| 2 | Floor water leak sensor, IP67 | Reports water at 0.5 mm with a notification and a buzzer. |
| 4 | Three-axis tilt sensor, IP67 | Deviation of the uprights from the reference position, range ±90°. |
Milesight devices of the highest quality with the manufacturer's warranty. Batteries included in all the sensors; the gateway is mains-powered through USB-C 5 V.
Available sizes
The size is selected at the top, together with the version and the connectivity. The diagram, the photo and the table above show the “6 bays, 2 entrances, 4 racking runs” size; with the other sizes only the quantities of the devices listed below change, the rest of the kit is identical.
- 6 bays, 2 entrances, 4 racking runs: 6 door contacts with temperature and humidity, 2 passage people counters, 4 temperature and humidity sensors, 2 water leak sensors, 4 tilt sensors
- 12 bays, 4 entrances, 8 racking runs: 12 door contacts with temperature and humidity, 4 passage people counters, 8 temperature and humidity sensors, 4 water leak sensors, 8 tilt sensors
- 18 bays, 6 entrances, 12 racking runs: 18 door contacts with temperature and humidity, 6 passage people counters, 12 temperature and humidity sensors, 6 water leak sensors, 12 tilt sensors
In the complete kit the installation material linked to these devices (brackets, thermowells, clips, cables, boxes) follows the size selected. For a different size, write to us from the contacts section.
Available connectivity options
- Customer network (Ethernet/Wi-Fi): 1 compact indoor LoRaWAN gateway
- Built-in 4G: 1 compact LoRaWAN gateway with 4G. SIM not included
- Large building (industrial shed): 1 semi-industrial LoRaWAN gateway
- Large building 4G: 1 semi-industrial LoRaWAN gateway with 4G. SIM not included
In the complete kit the material for the gateway (network cable, pole, PoE injector) changes accordingly. The SIM for the 4G versions is not included.
Choose the version
- The Milesight devices in the table
- Installation guide and initial configuration
- For those who already have wall plugs, double-sided tape and a network cable
- Everything in the basic version
- 5 m Ethernet cable to connect the gateway to the network
- Wall plugs and screws for transmitters, people counters and tilt sensors
- Structural double-sided tape, cable ties and adhesive cable clips for contacts and cables
- Numbered labels for the devices and installation diagram
Before you order
Is an internet connection needed in the warehouse?
It is needed at the point where the gateway is installed: a network socket or the company Wi-Fi coverage. The sensors do not use Wi-Fi, they talk to the gateway by radio. If there is no line in the warehouse, the version with a 4G gateway is available, which requires a data SIM (not included, any operator, traffic below 1 GB per month). It is selected when ordering.
Does a single gateway cover the whole building?
Inside a building the range depends on walls, floors and metal racking: the gateway goes in a central position and high up. For a medium-sized single-block warehouse the compact gateway is adequate. For large buildings, with tall and closely spaced racking or with several blocks, choose the “large building” variant: a semi-industrial IP65 gateway, with more range, which can be powered via PoE and installed even in an unheated environment. One gateway handles hundreds of devices.
Does it work with my sectional doors and my racking?
The magnetic contact can be applied to sectional, folding, sliding and roller shutter doors: all it needs is a fixed point and a moving one that are less than 20 mm apart with the door closed. The tilt sensors are fixed to any upright, with screws or with cable ties. Doors, ramps, racking and sprinkler system are not included and are not modified.
Do the sensors on the uprights detect the forklift impact?
They detect the consequence of the impact: they measure the tilt of the upright on the three axes, with an accuracy of ±1° and a resolution of 0.01°, and raise the alarm when the deviation from the reference position exceeds the threshold. A knock that leaves no deformation is not reported. They are one more continuous check, they do not replace the periodic inspections required for racking.
I have more than 6 bays or more racking runs
Among the product options you will find the sizes with 12 and 18 bays, with sensors in proportion; the gateway and the platform stay the same. For different compositions, write to us from the contacts section stating the number of bays, entrances and racking runs to be monitored and the floor area: we will send you the composition and the quotation of the adapted kit.
Battery life
Door contacts and temperature and humidity sensors: more than 10 declared years with one reading every 10 minutes and a good radio signal, about half of that with a weak signal. Leak sensors about 5.7 years, tilt sensors and people counters about 4 years. The batteries are lithium and replaceable; the charge level is visible in the app.
Where is the data viewed and are there any fees?
On the manufacturer's app and portal, from smartphone and PC, with charts, thresholds and notifications; no fee for basic use. If there is a warehouse management system or a supervision system, the gateway can also send the data to that system (MQTT or HTTP): the configuration is included.
What happens if the internet goes down?
The sensors keep measuring and transmitting to the gateway; the notifications resume when the line is restored. The people counters keep up to 1,000 records in memory and retransmit them. The leak sensors sound on site in any case with their built-in buzzer.
Is an electrician needed?
No. All the sensors are battery-powered and are fixed with screws, double-sided tape or cable ties. The gateway is powered from a USB-C socket at 5 V and connects to the network with an Ethernet cable or over Wi-Fi.
Do they withstand dust, cold and humidity?
Door contacts, temperature and humidity sensors, leak sensors and tilt sensors are IP67 and work down to -30 °C (the leak sensors down to -10 °C): they are also fine on the bays and in unheated warehouses. People counters and the compact gateway are IP30, indoor units: they go in a position sheltered from water and dust. The infrared people counters perform best between 15 and 30 °C.
What is not included
- Doors, gates, racking and sprinkler system: these are the ones in your warehouse
- The data SIM, in the version with a 4G gateway
- The 5 V USB power adapter for the gateway, if you do not already have one
- In the "devices only" version: network cable, wall plugs, double-sided tape, cable ties and labels
Shipping
Shipping: free to Italy and throughout the EU. Delivery in 10-20 working days.