
SPECIAL OFFER
This complete Victron Energy kit is on special offer.
Quattro 8kVA: €22,666.36 instead of
Save up to €2,780.20 on the same parts bought separately · prices excl. VAT
A 48V Victron energy storage system with the entire DC side included: 61.4kWh of Lithium NG batteries, a 10kVA or 8kVA Quattro inverter/charger of your choice, two independent banks each with its own Lynx Smart BMS NG, Cerbo GX monitoring with touch display, a 48V→12V converter for low-voltage loads, and a 32A shore power inlet with a 25m cord.
Built for installations that need serious autonomy: large boats and yachts, motorhomes and special vehicles, off-grid homes and mountain huts. Everything needed to wire batteries, BMS, Lynx busbars, inverter and Orion is in the box, sized according to Victron's manuals.
System at a glance
| System voltage | 51.2V nominal |
| Capacity | 1200Ah, 61.44kWh |
| Batteries | 8× Victron Lithium NG 25.6V 300Ah LiFePO4 |
| Battery management | 2 independent banks, each with its own Lynx Smart BMS NG 500A |
| Inverter/charger | your choice of Victron Quattro 48/10000/140-100/100 (10kVA, 140A charging) or Quattro 48/8000/110-100/100 (8kVA, 110A charging), both with two AC inputs |
| Protection | Class T fuses on the batteries, MEGA fuses on the loads |
| 12V output | Orion-Tr Smart 48/12-30A isolated |
| Monitoring | Cerbo GX MK2 with GX Touch 70, VRM portal |
| Shore power | 32A stainless steel Power Inlet with 25m cord |
| Total weight | approx. 520kg, shipped on a pallet |
How it is built
The batteries are split into two independent banks, each with its own Lynx Smart BMS NG and its own Class T protection. Both banks meet on the Lynx busbar, which feeds the Quattro and the 12V converter, each on its own fuse.
BMS, Quattro and Cerbo GX talk to each other, so charging and discharging are managed by the Victron electronics. The Cerbo GX is powered from both banks and stays on even when one of them is switched off for maintenance.
What's in the kit
- 8× Victron Lithium NG 25.6V 300Ah battery
- 2× Victron Lynx Smart BMS NG 500A
- Victron Lynx Class-T Power In and Lynx Distributor busbars
- Victron Quattro 48/10000/140-100/100 or Victron Quattro 48/8000/110-100/100, your choice
- Victron Cerbo GX MK2 with GX Touch 70 display
- Victron Orion-Tr Smart 48/12-30A isolated
- Victron Power Inlet 32A stainless steel and Shore Power Cord 25m 32A
- All the wiring material: fuses, power cables and lugs, communication cables, earth cable and everything needed to power the GX
Cable cross-sections and fuse ratings are the ones Victron's manuals specify for this configuration: we take care of the sizing.
Not included: solar panels and MPPT controllers, AC-side wiring and protection (AC panel, breakers, RCD) apart from the shore inlet and cord, battery racks or brackets, installation and commissioning.
Cables are supplied for a compact layout, with batteries, busbars and inverter close together. If your plant room needs longer runs, tell us before ordering and we will adapt the material.
Delivery
- Delivered in 10-20 days, on a pallet
- Shipping to Italy and the European Union
- Prices exclude VAT