WattKit
WattKit ELE-WK-DC-2S-T2 Pre-wired DC Combiner Box 2 Strings 1000V SPD Type 2
WattKit ELE-WK-DC-2S-T2 Pre-wired DC Combiner Box 2 Strings 1000V SPD Type 2
Regular price
€73.34
Regular price
Sale price
€73.34
Unit price
per
See the price with VAT
Price including VAT by delivery country
- Italy22% €89.47
- Germany19% €87.27
- France20% €88.00
- Austria20% €88.00
- Belgium21% €88.74
- Bulgaria20% €88.00
- Croatia25% €91.67
- Cyprus19% €87.27
- Czech Republic21% €88.74
- Denmark25% €91.67
- Estonia24% €90.94
- Finland25.5% €92.04
- Greece24% €90.94
- Hungary27% €93.14
- Ireland23% €90.20
- Latvia21% €88.74
- Lithuania21% €88.74
- Luxembourg17% €85.80
- Malta18% €86.54
- Netherlands21% €88.74
- Poland23% €90.20
- Portugal23% €90.20
- Romania21% €88.74
- Slovakia23% €90.20
- Slovenia22% €89.47
- Spain21% €88.74
- Sweden25% €91.67
Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).
Free shipping to Italy
Minimum order €400 excl. VAT
Couldn't load pickup availability
- Prices exclude VAT: tax is calculated in the cart based on the delivery country.
- EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
- Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.
Shipping
- Italy: free shipping over €150.
- European Union: 60 € per order, with no threshold
Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.
Delivery in 10-20 daysCombiner boxWattKit
WattKit ELE-WK-DC-2S-T2 Pre-wired DC Combiner Box 2 Strings 1000V SPD Type 2
The WattKit ELE-WK-DC-2S-T2 pre-wired DC combiner box is an array box already assembled and factory wired for the protection of the DC side of a photovoltaic plant with 2 strings. Inside are fitted the Type 2 surge protective devices (3 poles, 20–40kA, 1000V DC) and the fuse holders on the positive and negative conductor of each string, following the manufacturer's diagram.
It is installed between the PV modules and the inverter, typically wall mounted close to the inverter itself or on the roof. Connections are made through MC4 connectors passing through the bottom of the box, with a cable gland for the earth conductor and a pressure compensation valve; the enclosure has an IP65 protection rating and an operating temperature from −25 to +60 °C, so it can also be used outdoors. Because it comes pre-wired, it considerably reduces assembly time compared with fitting individual components on a DIN rail.
Key features
Already assembled and wiredNo component assembly on site: it cuts installation time and the risk of wiring errors.
Built-in Type 2 surge arresterThree-pole 1000V DC SPD with In of 20kA and Imax of 40kA, protecting the inverter and the string cables.
Overcurrent protectionFuse holders on the positive and the negative of each of the two strings, following the manufacturer's wiring diagram.
Two strings in and outA 2 strings IN / 2 strings OUT configuration, sized for residential plants.
IP65 enclosure for outdoor useResistant to dust, water and UV rays, with an operating temperature from −25 to +60 °C.
MC4 connectors and earthingQuick termination of the string cables with standard MC4 connectors and a dedicated earth terminal.
Technical specifications
| Feature | Value |
|---|---|
| Product code | ELE-WK-DC-2S-T2 |
| Product type | Pre-wired DC field board (combiner box) |
| Number of input strings | 2 |
| Number of output strings | 2 |
| Rated voltage | 1000V CC |
| Operating current | 30A |
| Surge arrester | 3-pole DC SPD, Type 2, 20–40kA, 1000V DC |
| Overcurrent protection | Fuse holders on the positive and negative pole of each string |
| Connections | MC4 connectors on input and output, earth terminal |
| Protection degree | IP65 |
| Operating temperature | −25…+60 °C |
| Pressure equalization valve | Included |
| Dimensions | 218 × 200 × 100 mm |
| Weight | 0.5 kg |
| Warranty | 1 year (excluding consumables such as fuses) |
Documentation
PDFDatasheetOfficial manufacturer documentInstallation and wiring must be carried out by qualified personnel in accordance with the applicable standards and the electrical design of the system.