Skip to product information
1 of 1

Litio Store

AC Combiner Box 16A Three-Phase with Type 2 SPD

AC Combiner Box 16A Three-Phase with Type 2 SPD

Regular price €116.71
Regular price Sale price €116.71
Sale Sold out Excl. VAT — calculated in the cart
See the price with VAT

Price including VAT by delivery country

  • Italy22% €142.38
  • Germany19% €138.88
  • France20% €140.05
  • Austria20% €140.05
  • Belgium21% €141.21
  • Bulgaria20% €140.05
  • Croatia25% €145.88
  • Cyprus19% €138.88
  • Czech Republic21% €141.21
  • Denmark25% €145.88
  • Estonia24% €144.72
  • Finland25.5% €146.47
  • Greece24% €144.72
  • Hungary27% €148.22
  • Ireland23% €143.55
  • Latvia21% €141.21
  • Lithuania21% €141.21
  • Luxembourg17% €136.55
  • Malta18% €137.71
  • Netherlands21% €141.21
  • Poland23% €143.55
  • Portugal23% €143.55
  • Romania21% €141.21
  • Slovakia23% €143.55
  • Slovenia22% €142.38
  • Spain21% €141.21
  • Sweden25% €145.88

Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).

Free shipping to Italy Minimum order €400 excl. VAT
Configure your system in two minutes Pick the inverter and get the batteries it accepts, modules per string, switchboards, price per kWp and a cart ready to check out. Open the configurator →
  • Prices exclude VAT: tax is calculated in the cart based on the delivery country.
  • EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
  • Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.

Shipping

  • Italy: free shipping over €150.
  • European Union: 60 € per order, with no threshold

Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.

View full details
Delivery in 10-20 daysCombiner boxAC sideLitio Store

AC Combiner Box 16A Three-Phase with Type 2 SPD

Alternating current combiner box for three-phase photovoltaic systems, designed for installation on the AC side between the inverter and the building's distribution board. It concentrates line protection and surge protection in a single container, avoiding the use of space in the existing consumer unit and making periodic checks easier.

The equipment includes a 16A miniature circuit breaker, which protects the three-phase line against overloads and short circuits and acts as the inverter's isolating device, and a Type 2 surge protective device (class II) for limiting transient surges induced by indirect lightning strikes or by grid switching operations. The 16A size on a 400V three-phase grid covers inverters up to roughly 11kW.

Key features

Complete AC line protection16A circuit breaker against overload and short circuit on the three-phase line running to the main board.
Type 2 surge arresterThe class II SPD protects the inverter and the system from transient grid surges and those of indirect atmospheric origin.
The most common size16A three-phase: a typical value for photovoltaic inverters with an indicative power output of up to about 11kW.
Quick installationThe box is already assembled and internally wired: only the input and output connections are required.
Inverter isolationIt allows the inverter to be safely isolated from the grid during maintenance and inspections.
Contained dimensions319 × 259 × 144 mm for 1.6 kg: wall installation next to the inverter.

Technical specifications

FeatureValue
Switchboard typeAC combiner box for photovoltaic systems
System sideAlternating current (AC), between the inverter and the distribution board
Number of poles / phasesThree-phase (3L + N)
Nominal current16A
Indicative inverter powerUp to approx. 11kW (400V three-phase, 16A)
Surge protective device (type)Type 2 SPD (class II)
Miniature circuit breaker (MCB)Yes, 16A
Residual current device (RCD)Not present
Dedicated isolator switchNot present: isolation is provided by the miniature circuit breaker
Dimensions319 × 259 × 144 mm
Weight1.6 kg
Reference standards of the componentsEN 61643-11 (surge protective devices), EN 60898-1 (miniature circuit breakers)

Installation and wiring must be carried out by qualified personnel in accordance with the applicable standards and the electrical design of the system.