Litio Store
DC Combiner Box 1000V with Type 2 SPD and 4 Fuses 15A for 2 Strings and 2 MPPT
DC Combiner Box 1000V with Type 2 SPD and 4 Fuses 15A for 2 Strings and 2 MPPT
Regular price
€194.60
Regular price
Sale price
€194.60
Unit price
per
See the price with VAT
Price including VAT by delivery country
- Italy22% €237.41
- Germany19% €231.57
- France20% €233.52
- Austria20% €233.52
- Belgium21% €235.46
- Bulgaria20% €233.52
- Croatia25% €243.25
- Cyprus19% €231.57
- Czech Republic21% €235.46
- Denmark25% €243.25
- Estonia24% €241.30
- Finland25.5% €244.22
- Greece24% €241.30
- Hungary27% €247.14
- Ireland23% €239.35
- Latvia21% €235.46
- Lithuania21% €235.46
- Luxembourg17% €227.68
- Malta18% €229.62
- Netherlands21% €235.46
- Poland23% €239.35
- Portugal23% €239.35
- Romania21% €235.46
- Slovakia23% €239.35
- Slovenia22% €237.41
- Spain21% €235.46
- Sweden25% €243.25
Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).
Free shipping to Italy
Minimum order €400 excl. VAT
Couldn't load pickup availability
- Prices exclude VAT: tax is calculated in the cart based on the delivery country.
- EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
- Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.
Shipping
- Italy: free shipping over €150.
- European Union: 60 € per order, with no threshold
Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.
Delivery in 10-20 daysCombiner boxDC sideLitio Store
DC Combiner Box 1000V with Type 2 SPD and 4 Fuses 15A for 2 Strings and 2 MPPT
DC-side combiner box for photovoltaic systems up to 1000V DC, designed for 2 strings connected to 2 MPPT inputs. It is placed along the route of the string cables between the photovoltaic generator and the inverter, and concentrates surge protection and string overcurrent protection in a single enclosure.
The equipment includes a Type 2 surge protective device, intended to limit the transient surges induced by indirect lightning strikes and by switching operations on the grid, and 4 fuse holders with 15A fuses: two for each string, one on the positive pole and one on the negative pole. The gPV fuses protect the cables and the modules against the reverse currents that can occur when several strings are connected in parallel or in the event of a fault, and they also allow each pole to be isolated individually for maintenance work.
Key features
2 strings and 2 MPPTsSeparate inputs for two photovoltaic strings, each referred to an independent MPPT of the inverter.
4 fuses of 15AOvercurrent protection on both poles of each string, with fuse holders that also act as an isolation point.
Type 2 surge arresterIt limits induced transient surges, protecting the DC inputs of the inverter and the modules.
Voltage up to 1000V DCCompatible with standard photovoltaic strings within 1000V of open-circuit voltage.
Enclosure of 319 × 259 mmDimensions 319 × 259 × 144 mm and a weight of 2.9 kg, for wall mounting.
Pre-wired boxSupplied already assembled and wired, ready for connection of the string cables and of the line to the inverter.
Technical specifications
| Feature | Value |
|---|---|
| Switchboard type | Photovoltaic combiner box (junction box) |
| System side | Direct current (DC) |
| Number of PV strings | 2 |
| MPPTs managed | 2 |
| Maximum PV voltage | 1000V DC |
| Surge protective device (SPD) | Type 2 SPD, 1000V DC |
| Fuses | 4 × 15A (2 per string, positive and negative pole) |
| Dimensions | 319 × 259 × 144 mm |
| Weight | 2.9 kg |
Installation and wiring must be carried out by qualified personnel in accordance with the applicable standards and the electrical design of the system.