Litio Store
DC+AC Combiner Box with Type 2 SPD, 1 PV String 1000V and 10A Three-Phase AC Section
DC+AC Combiner Box with Type 2 SPD, 1 PV String 1000V and 10A Three-Phase AC Section
Regular price
€180.44
Regular price
Sale price
€180.44
Unit price
per
See the price with VAT
Price including VAT by delivery country
- Italy22% €220.13
- Germany19% €214.72
- France20% €216.52
- Austria20% €216.52
- Belgium21% €218.33
- Bulgaria20% €216.52
- Croatia25% €225.55
- Cyprus19% €214.72
- Czech Republic21% €218.33
- Denmark25% €225.55
- Estonia24% €223.74
- Finland25.5% €226.45
- Greece24% €223.74
- Hungary27% €229.15
- Ireland23% €221.94
- Latvia21% €218.33
- Lithuania21% €218.33
- Luxembourg17% €211.11
- Malta18% €212.91
- Netherlands21% €218.33
- Poland23% €221.94
- Portugal23% €221.94
- Romania21% €218.33
- Slovakia23% €221.94
- Slovenia22% €220.13
- Spain21% €218.33
- Sweden25% €225.55
Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).
Free shipping to Italy
Minimum order €400 excl. VAT
Couldn't load pickup availability
- Prices exclude VAT: tax is calculated in the cart based on the delivery country.
- EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
- Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.
Shipping
- Italy: free shipping over €150.
- European Union: 60 € per order, with no threshold
Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.
Delivery in 10-20 daysCombiner boxDC+AC sideLitio Store
DC+AC Combiner Box with Type 2 SPD, 1 PV String 1000V and 10A Three-Phase AC Section
Combiner box combining DC and AC for small three-phase photovoltaic systems. The direct current side is designed for 1 PV string on 1 MPPT input with a voltage of up to 1000V DC; the alternating current side is rated for a 10A three-phase connection, a value suited to lower-power three-phase inverters.
Protection is provided by Type 2 surge protective devices present on both sections: on the direct current side to safeguard the modules and the DC inputs of the inverter, and on the alternating current side to safeguard the inverter output and the line running to the building's main distribution board. By bringing the two protections together in a single enclosure, the box replaces two separate items of equipment and simplifies both installation and subsequent periodic inspections.
Key features
DC and AC protection in one boxThe surge protection devices on both sides of the inverter are gathered in a single enclosure.
1 string and 1 MPPTDC side for one photovoltaic string on a single MPPT tracker.
Dual Type 2 surge arresterType 2 arresters against transient overvoltages, both at 1000V DC and on the AC side.
10A three-phase AC sectionRating suited to low-power three-phase inverters.
300 × 325 mm enclosureDimensions 300 × 325 × 157 mm for a weight of 2.7 kg, with wall mounting.
Pre-wired boxSupplied factory-assembled and wired, ready for connection on site.
Technical specifications
| Feature | Value |
|---|---|
| Switchboard type | Combined DC + AC combiner box |
| System side | Direct current and alternating current (DC+AC) |
| Number of PV strings | 1 |
| MPPTs managed | 1 |
| Maximum PV voltage | 1000V DC |
| DC-side surge protective device (SPD) | Type 2 SPD, 1000V DC |
| AC-side surge protective device (SPD) | Type 2 SPD |
| Rated AC-side current | 10A |
| Number of AC-side phases | 3 (three-phase) |
| Dimensions | 300 × 325 × 157 mm |
| Weight | 2.7 kg |
Installation and wiring must be carried out by qualified personnel in accordance with the applicable standards and the electrical design of the system.