Skip to product information
1 of 1

Litio Store

DC+AC Combiner Box Type 1+2 SPD, 2 Strings 2 MPPT, 32A Single-Phase, 40A 300mA RCCB

DC+AC Combiner Box Type 1+2 SPD, 2 Strings 2 MPPT, 32A Single-Phase, 40A 300mA RCCB

Regular price €358.48
Regular price Sale price €358.48
Sale Sold out Excl. VAT — calculated in the cart
See the price with VAT

Price including VAT by delivery country

  • Italy22% €437.34
  • Germany19% €426.59
  • France20% €430.17
  • Austria20% €430.17
  • Belgium21% €433.76
  • Bulgaria20% €430.17
  • Croatia25% €448.10
  • Cyprus19% €426.59
  • Czech Republic21% €433.76
  • Denmark25% €448.10
  • Estonia24% €444.51
  • Finland25.5% €449.89
  • Greece24% €444.51
  • Hungary27% €455.26
  • Ireland23% €440.93
  • Latvia21% €433.76
  • Lithuania21% €433.76
  • Luxembourg17% €419.42
  • Malta18% €423.00
  • Netherlands21% €433.76
  • Poland23% €440.93
  • Portugal23% €440.93
  • Romania21% €433.76
  • Slovakia23% €440.93
  • Slovenia22% €437.34
  • Spain21% €433.76
  • Sweden25% €448.10

Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).

Free shipping to Italy Minimum order €400 excl. VAT
Configure your system in two minutes Pick the inverter and get the batteries it accepts, modules per string, switchboards, price per kWp and a cart ready to check out. Open the configurator →
  • Prices exclude VAT: tax is calculated in the cart based on the delivery country.
  • EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
  • Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.

Shipping

  • Italy: free shipping over €150.
  • European Union: 60 € per order, with no threshold

Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.

View full details
Delivery in 10-20 daysCombiner boxDC+AC sideLitio Store

DC+AC Combiner Box Type 1+2 SPD, 2 Strings 2 MPPT, 32A Single-Phase, 40A 300mA RCCB

Combined DC+AC combiner box for single-phase photovoltaic systems, with complete protection on both sides of the inverter. It collects 2 PV strings on 2 MPPT inputs and is the recommended solution for homes fitted with a lightning protection system.

The DC side is protected by a Type 1+2 surge protective device for 1000V DC and the AC side by a second Type 1+2 arrester: both are also able to discharge direct lightning current. The AC line is completed by a 32A single-phase miniature circuit breaker and by a 40A residual current circuit breaker with a 300mA threshold, sized for protection against electrically caused fires.

Key features

Type 1+2 SPD on both sidesCombined arresters on DC and on AC, suitable for buildings with a lightning protection system.
40A 300mA residual current protectionThe 40A residual current circuit breaker with a 300mA threshold protects the AC line against earth faults and electrically caused fires.
32A single-phase MCBIt protects the AC line against overload and short circuit and allows the inverter to be isolated from the distribution board.
2 strings, 2 MPPTThe two strings remain independent up to the inverter, with separate maximum power point tracking for each one.
All the protective devices in a single boxSPDs, MCB and RCCB already wired in one wall enclosure, instead of several separate boxes.
String voltage up to 1000VSuitable for single-phase string inverters with a maximum input voltage of 1000V DC.

Technical specifications

FeatureValue
Switchboard typeCombined DC+AC combiner box with residual current protection
System sideDirect current and alternating current
Number of PV strings2
MPPTs managed2
Maximum PV voltage1000V DC
DC surge protective device (SPD)Type 1+2, 1000V DC
AC surge protective device (SPD)Type 1+2
Miniature circuit breaker (MCB)32A, single-phase (1P)
Residual current device (RCD)40A, 300mA
Number of poles / phasesSingle-phase AC side
Dimensions (W × H × D)319 × 384 × 144 mm
Weight3.54 kg
Reference standards of the componentsEN 61643-11 (AC SPDs), EN 61643-31 (PV SPDs), IEC/EN 60898-1 (MCB), IEC/EN 61008-1 or 61009-1 (RCD)

Installation and wiring must be carried out by qualified personnel in accordance with the applicable standards and the electrical design of the system.