
Delivery in 10-20 daysWarranty 2 yearsREDARC
Shipping costsItaly: free over €150; €13 for smaller orders.
European Union: free from €350; €60 for smaller orders.
European Union: free from €350; €60 for smaller orders.
Redarc BCDCWK-004 wiring kit for 40A/50A BCDC DC-DC battery charger, side-by-side engine bay install
The Redarc BCDCWK-004 is the wiring kit for installing a BCDC1240D or BCDC1250D DC-DC battery charger when the start battery and auxiliary battery are close together in the engine bay (less than 0.6 m apart).
It contains cables, fuses, fuse holders and connectors rated for the current of the 40A and 50A BCDC models. The cables are pre-crimped at one end; with the supplied junction block, the other end can be cut to length.
Key features
For 40A and 50A BCDCCables and protection sized for BCDC1240D and BCDC1250D.
Batteries close togetherIdeal when both batteries are under the bonnet, less than 0.6 m apart.
Complete solutionCables, fuse kit, junction block, Wago connector and conduit included.
Pre-crimped cablesOne end factory-terminated, the other cut to length.
Protected wiring1 m of conduit and cable ties for a tidy installation.
Technical specifications
| Feature | Value |
|---|---|
| REDARC part number | BCDCWK-004 |
| Installation type | Side-by-side in the engine bay (batteries less than 0.6 m apart) |
| Maximum BCDC current | 50 A |
| Compatible BCDC | BCDC1240D, BCDC1250D |
| Cables | Brown, black and red, pre-crimped at one end |
| Short red cable | 150 mm |
| Fuses | Fuse kit with MIDI fuses and fuse holders |
| Blue wire | Included, with Wago® connector and cap |
| Junction block | With plastic cover, M5 × 25 mm socket head screw, M5 nylon lock nuts, M5 flat washers |
| Protective conduit | 1 m |
| Accessories | Cable ties |
| Warranty | 2 years |