
Safiery STAR-Rover-4 Wireless + CAN 4-Channel 15A (12V/24V)
STAR is Safiery digital switching: wireless and CAN switching modules that replace relays and wiring looms and integrate straight into Victron systems. They are driven from a keypad, from the app or from the on-board display, and every channel is electronically protected.
Four channels of 15A (up to 40A) positive or negative, CAN/NMEA and Bluetooth.
STAR-Rover-4 Wireless+CAN is the compact member of Safiery's STAR digital switching range: four 15A channels (40A total) in a 70 x 55 x 22mm ABS housing, built for locations where a full-size STAR-Power or STAR-Light panel won't fit. It's rated IP65, ahead of STAR-Power and STAR-Light which are both IP54 - so it's the one to fit under a seat or anywhere else moisture is a genuine concern rather than an occasional risk.
Every channel on the Rover can be assigned as positive or negative switching, a flexibility STAR-Power doesn't have (it's positive-only across its 12 channels) and that Rover shares with STAR-Light. Run standard loads on any of the four 15A outputs, or configure the bank as 2 x dual-colour LED pairs or a single full RGBW zone - a lighter option than committing to the 12-channel STAR-Light when a build only needs one or two lighting zones alongside its regular switching.
Like the rest of the STAR range, Rover talks CAN/NMEA (SAE J1939 and NMEA 2000 - open, published standards, not a proprietary bus) through its single CAN port, plus Bluetooth Long Range for wireless switches and phone-based setup, so it drops onto the same backbone as other STAR controllers or NMEA 2000 displays. Outputs are fuseless - a hardware trip opens the circuit in around 80 microseconds if something shorts - though Safiery's own wire/fuse safety table still specifies a fused 6mm² supply feed (50A max) running in from the battery. Unlike STAR-Power, Rover carries no manual backup buttons on the housing; it's controlled entirely via CAN, Bluetooth, or its own WiFi setup page.
- 4× 15A
- CAN/NMEA
- Bluetooth
Technical specifications
| Channels | 4 x 15A dimmable outputs (40A max total); configurable as 2 x dual-colour pairs or 1 x full RGBW zone |
|---|---|
| Channel polarity | Each channel individually assignable as positive or negative control |
| Operating voltage | 10-32V DC |
| Communication | 1 x CAN port (NMEA-style connector) + Bluetooth Long Range |
| IP rating | IP65 |
| Construction | ABS plastic |
| Dimensions | 70 x 55 x 22mm |
| Output wiring | 15A per output, 2.5mm², crimp-and-seal connections |
| Supply wiring & fuse | 6mm² min. supply wire, 50A max. fuse (manual's wire/fuse safety table); a separate description-page figure gives 4mm²/40A max for the power input - not reconciled in the source manual |
| Short-circuit protection | Fuseless hardware trip in approx. 80 microseconds (STAR-range-wide spec); no fuse required on the output leg |
| Manual backup buttons | None on-board (unlike STAR-Power's 12 manual backup buttons) |
Documentation
Videos
SHIPPING INCLUDED IN THE PRICE
The price includes transport to your address in Italy and the European Union. No extra cost on delivery.
Shipped from the Safiery warehouse in Australia, indicative delivery 10-20 working days. Write to info@litio.store for current lead times and availability.