• Sezionatore Portafusibile Jean Müller KETO-00 con 2 Fusibili 100A 250V CC per Batterie
1 1

Jean Müller

Jean Müller KETO-00 Fuse Switch-Disconnector with 2 Fuses 100A 250V DC for Batteries

Jean Müller KETO-00 Fuse Switch-Disconnector with 2 Fuses 100A 250V DC for Batteries

€67.91
€67.91
Sale Sold out Excl. VAT — calculated in the cart
See the price with VAT

Price including VAT by delivery country

  • Italy22% €82.85
  • Germany19% €80.81
  • France20% €81.49
  • Austria20% €81.49
  • Belgium21% €82.17
  • Bulgaria20% €81.49
  • Croatia25% €84.88
  • Cyprus19% €80.81
  • Czech Republic21% €82.17
  • Denmark25% €84.88
  • Estonia24% €84.20
  • Finland25.5% €85.22
  • Greece24% €84.20
  • Hungary27% €86.24
  • Ireland23% €83.52
  • Latvia21% €82.17
  • Lithuania21% €82.17
  • Luxembourg17% €79.45
  • Malta18% €80.13
  • Netherlands21% €82.17
  • Poland23% €83.52
  • Portugal23% €83.52
  • Romania21% €82.17
  • Slovakia23% €83.52
  • Slovenia22% €82.85
  • Spain21% €82.17
  • Sweden25% €84.88

Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).

  • Prices exclude VAT: tax is calculated in the cart based on the delivery country.
  • EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
  • Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.

AVAILABILITY

14 units at this price

Shipping

  • Italy: €13 on orders up to €150, free shipping over €150.
  • European Union: 60 € per order, with no threshold

Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.

Read the full shipping conditions

View full details
Delivery in 10-20 daysJean Müller

Jean Müller KETO-00 Fuse Switch-Disconnector with 2 Fuses 100A 250V DC for Batteries

This is the KETO-00 ready to go: the Jean Müller fuse switch-disconnector supplied with two 100A NH fuse links already in place, one for the positive pole and one for the negative. It sits between the battery bank and the inverter and does two jobs in one device: it isolates the DC side by hand, for maintenance or an emergency, and it protects it from short circuits through the fuses.

Unlike the bare body there is nothing else to order: the pair of links is already sized at 100A, gG general-purpose class, with a breaking capacity declared by Jean Müller of 120kA. It is the convenient choice when the bank’s charge and discharge current, margin included, falls inside that figure.

The kit works to 250V DC, the figure Jean Müller gives for the KETO 00, so it covers 48V and 51.2V banks, single or paralleled. Terminals are M8 flat for 25mm² to 95mm² cable, width is 106mm with a 195mm system size, and mounting is on DIN rail. Installation is a job for a qualified electrician, to local wiring rules.

Key strengths

Fuses includedKETO-00 body plus two 100A NH links, nothing to add.
Isolates and protectsLoad-break isolation of the DC side plus short-circuit protection.
100A up to 250V DCFor 48V and 51.2V banks, single or paralleled.
gG class, 120kAGeneral-purpose links, breaking capacity declared by Jean Müller.
DIN rail mountingM8 flat terminals for 25mm² to 95mm² cable.

Technical specifications

Feature Value
Product code KETO-00-100A
Manufacturer Jean Müller
Type NH fuse switch-disconnector kit with links included
Contents 1 KETO-00 body + 2 fuse links rated 100A
Body code KETO-00 (Jean Müller T500113002, KETO-00-3/F)
Fuse link code N5014307-100A (M000GL100ISM, Jean Müller data)
Maximum DC current 100A
Fuse link class gG (Jean Müller data)
Rated DC voltage 250V DC (Jean Müller figure for the KETO 00)
Rated AC voltage 690V (Jean Müller data)
Body rated current 160A (Jean Müller data)
Fuse size NH000 (Jean Müller data)
Fuse link breaking capacity 120kA (Jean Müller data)
Terminals M8 flat terminal for 25mm² to 95mm² cable
Width 106mm
System size 195mm
Mounting DIN rail
Degree of protection IP20 at the front with the device fitted (Jean Müller data)
Impulse withstand voltage 8kV (Jean Müller data)
Operating temperature -25°C to +70°C (Jean Müller data)
Standards DIN EN 60947-3; NH fuse links to DIN VDE 0636-2
Weight 1.06kg