• Unità di Controllo Dyness Stack100 Pro BDU + Base per Accumulo Alta Tensione
1 1

Dyness

Dyness Stack100 Pro BDU Control Unit with Base for High Voltage Storage

Dyness Stack100 Pro BDU Control Unit with Base for High Voltage Storage

€816.47
€816.47
Sale Sold out Excl. VAT — calculated in the cart
See the price with VAT

Price including VAT by delivery country

  • Italy22% €996.09
  • Germany19% €971.59
  • France20% €979.76
  • Austria20% €979.76
  • Belgium21% €987.92
  • Bulgaria20% €979.76
  • Croatia25% €1,020.58
  • Cyprus19% €971.59
  • Czech Republic21% €987.92
  • Denmark25% €1,020.58
  • Estonia24% €1,012.42
  • Finland25.5% €1,024.66
  • Greece24% €1,012.42
  • Hungary27% €1,036.91
  • Ireland23% €1,004.25
  • Latvia21% €987.92
  • Lithuania21% €987.92
  • Luxembourg17% €955.26
  • Malta18% €963.43
  • Netherlands21% €987.92
  • Poland23% €1,004.25
  • Portugal23% €1,004.25
  • Romania21% €987.92
  • Slovakia23% €1,004.25
  • Slovenia22% €996.09
  • Spain21% €987.92
  • Sweden25% €1,020.58

Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).

  • Prices exclude VAT: tax is calculated in the cart based on the delivery country.
  • EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
  • Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.

AVAILABILITY

39 units at this price

Shipping

  • Italy: €13 on orders up to €150, free shipping over €150.
  • European Union: 60 € per order, with no threshold

Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.

Read the full shipping conditions

View full details
Delivery in 10-20 daysDyness

Dyness Stack100 Pro BDU Control Unit with Base for High Voltage Storage

The BDU of the Dyness Stack100 Pro is the central control unit of the storage system: without it the tower does not come into service. It handles protection, thermal management and communication, and ships together with the base the battery modules stack on. You need one per tower.

The Stack100 Pro is a rackless modular high-voltage store with cable-free stacking: a cluster goes up in about half an hour. It starts at 15.36kWh and reaches 921kWh, with up to 15 modules per tower and 12 towers in parallel: a span from demanding homes to commercial and industrial sites.

On safety Dyness states a six-layer protection system with IP66 certification, aerosol fire suppression, temperature probes and optional aerogel fire protection. Control runs through the built-in WLAN module, with app, real-time monitoring on an LED interface and OTA firmware updates. Cooling is natural convection, so it stays silent. Over 8,000 declared cycles and 95% usable capacity per module. The BDU plus base weighs 34.7kg.

Key strengths

Essential to the towerWithout the BDU a Stack100 Pro system does not run: one per tower.
Base includedComes with the base the battery modules stack on.
From 15.36 to 921kWhUp to 15 modules per tower and 12 towers in parallel.
Six-layer protectionIP66, aerosol suppression, temperature probes, optional aerogel.
WiFi, app and OTABuilt-in WLAN module, real-time monitoring and remote updates.
Quick to installCable-free stacking: a cluster goes up in around 30 minutes.

Technical specifications

Feature Value
Product code DY-STACK100-PRO-BDU-BASE
Manufacturer Dyness
Type BDU control unit with base for a high-voltage storage system
Series Dyness Stack100 Pro
Contents BDU + base
Quantity required One per tower
Modules per tower up to 15
Towers in parallel up to 12
System energy 15.36kWh to 921kWh
Safety Six-layer protection, aerosol suppression, temperature probes, optional aerogel
Protection rating IP66
Communication Built-in WLAN module, app, LED interface, OTA updates
Cooling Natural convection
Declared cycles over 8,000
Usable capacity per module 95%
Weight 34.7kg
Length 0.66m
PDFManufacturer datasheetPDF document