Deye
Deye SE-F12 Version C LiFePO4 Battery 12.03kWh 51.2V
Deye SE-F12 Version C LiFePO4 Battery 12.03kWh 51.2V
Regular price
€1,700.00
Regular price
Sale price
€1,700.00
Unit price
per
See the price with VAT
Price including VAT by delivery country
- Italy22% €2,074.00
- Germany19% €2,023.00
- France20% €2,040.00
- Austria20% €2,040.00
- Belgium21% €2,057.00
- Bulgaria20% €2,040.00
- Croatia25% €2,125.00
- Cyprus19% €2,023.00
- Czech Republic21% €2,057.00
- Denmark25% €2,125.00
- Estonia24% €2,108.00
- Finland25.5% €2,133.50
- Greece24% €2,108.00
- Hungary27% €2,159.00
- Ireland23% €2,091.00
- Latvia21% €2,057.00
- Lithuania21% €2,057.00
- Luxembourg17% €1,989.00
- Malta18% €2,006.00
- Netherlands21% €2,057.00
- Poland23% €2,091.00
- Portugal23% €2,091.00
- Romania21% €2,057.00
- Slovakia23% €2,091.00
- Slovenia22% €2,074.00
- Spain21% €2,057.00
- Sweden25% €2,125.00
Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).
Couldn't load pickup availability
- Prices exclude VAT: tax is calculated in the cart based on the delivery country.
- EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
- Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.
Shipping
- Italy: €13 on orders up to €150, free shipping over €150.
- European Union: 60 € per order, with no threshold
Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.
Delivery in 10-20 daysBatteryDeye
Deye SE-F12 Version C LiFePO4 Battery 12.03kWh 51.2V
The Deye SE-F12 is a LiFePO4 battery at 51.2V with 230Ah of capacity, the middle size of the SE-F family: enough energy to cover evening and night in a house with a heat pump, without the bulk and weight of the 16kWh modules.
What sets it apart is current: 230A continuous in charge and discharge, with 280A peaks for ten seconds, so there is no bottleneck when the hybrid inverter asks for all the power available. The integrated BMS talks over CAN 2.0 and RS485 and publishes data to the Bluetooth app, while paralleling up to 32 units lets the system grow over time. It installs on a wall, on the floor or stacked and works with Deye 48V low-voltage hybrid and off-grid inverters.
Key features
230A continuous both waysContinuous charge and discharge at 230A with 280A peaks for 10 seconds: the battery follows the inverter without capping available power.
230Ah in a single blockOne 51.2V module avoids multiplying units: a single cable set and a single communication point with the inverter.
Three mounting optionsWall, floor or stacked with other modules, to suit garages, technical rooms and understairs spaces.
Expandable to 32 unitsParalleling up to 32 batteries lets you start small and grow; monitoring over CAN 2.0, RS485 and the Bluetooth app.
Technical specifications
| Feature | Value |
|---|---|
| Product code | SE-F12 Version C |
| Nominal energy | 12.03kWh |
| Nominal capacity | 230Ah |
| Nominal voltage | 51.2V |
| Voltage range | 44.8-57.6V |
| Cell chemistry | LiFePO4 (lithium iron phosphate) |
| Max. continuous charge current | 230A |
| Max. continuous discharge current | 230A |
| Peak current | 280A for 10 s |
| Cycle life | >= 6000 cycles (25 °C, 70% EOL) |
| Recommended DoD | 90% |
| Energy throughput | 18 MWh |
| BMS | Integrated BMS with full protection and cell balancing |
| Communication | CAN 2.0, RS485 and Bluetooth app |
| Scalability | Up to 32 units in parallel |
| Charge temperature | 0 to +55 °C |
| Discharge temperature | -20 to +55 °C |
| Dimensions (W x H x D) | 400 x 559 x 233 mm |
| Weight | 84 kg |
| Installation | Wall, floor or stack mounted |
| Certifications | UN38.3, MSDS, CE, CB |
| Warranty | 5 years |
Documentation
PDFDatasheet serie SE-FOfficial manufacturer documentPDFDeye battery brochureOfficial manufacturer documentPDFBrochure serie SE-FOfficial manufacturer documentInstallation and wiring must be carried out by qualified personnel in accordance with the applicable standards and the electrical design of the system.