Safiery STAR-Power Wireless 6× 35A + 6× 10A Switching (12V/24V)

Litio Store is an official Safiery distributor. We pay the import taxes: the price you see here is the price you pay, with no duties and no customs clearance charges on delivery.

STAR is Safiery digital switching: wireless and CAN switching modules that replace relays and wiring looms and integrate straight into Victron systems. They are driven from a keypad, from the app or from the on-board display, and every channel is electronically protected.

Digital switching to 150A with long-range Bluetooth control. Six 35A + six 10A channels, integrates with Victron.

STAR-Power is Safiery's flagship digital switching controller — a 12V distribution panel controller with twelve outputs: six 30A channels (fixed on/off) for high-current loads, plus six 10A dimmable channels, rated to 100A continuous and up to 150A through the unit. Safiery's operating manual is explicit that STAR-Power — like the rest of the STAR range — is built for the main distribution panel in the rear of vehicles, motorhomes, vans and caravans, not the engine bay or the cabin: this is the controller for the build that needs one box doing real current, not just signal switching.

Inside the STAR range, it's the high-current specialist. STAR-Light (12 x 10A channels, 40A total) is built for lighting circuits and RGBW colour control; STAR-Rover (4 x 15A channels, 40A total, IP65) is built for tight or harsh-condition mounting spots. STAR-Power is the only one of the three rated to 150A. It also has twelve manual backup buttons built into the controller face, direct-driving every output even if CAN, Bluetooth and WiFi all fail at once — STAR-Rover has no backup buttons at all. It's also positive-switching only on every channel (negatives go straight to ground or battery, not back through the controller), where STAR-Rover lets you configure each channel as positive or negative.

Like every STAR controller, it runs CAN bus (NMEA 2000-compatible, integrates with Victron), Bluetooth Long Range — supporting up to 80 wireless switches on a single system — and Matter WiFi, all simultaneously, on open standards rather than a closed system like Redarc's R-Bus. Short-circuit protection is fuseless, opening the circuit in 80 microseconds.

• Delivery in 30-45 days
• 150A
• Bluetooth
• Victron

Key features

• Wireless and CAN switching with no relays and no wiring looms
• Integrates straight into Victron systems
• Control from keypad, app or on-board display
• Every channel electronically protected
• Designed for the living area of motorhomes, vans and caravans

How it works

Digital switching replaces the relays and the wiring looms that normally link every switch to its load. A STAR module is fitted next to the loads (lights, pumps, awning, fridge) and short wires run from the module to the load; the buttons talk to the module over radio or CAN, so no control cable has to reach the dashboard. Every channel has its own electronic protection: if a load draws too much, the channel opens by itself and is reset from the button or the app, with no fuse to change. Connect the CAN bus to a Victron Cerbo GX or a Quasar Glass display and the same channels are controlled from the on-board screen.

Technical specifications

Documentation

• Manual — Download the PDF
• Declaration of conformity — Download the PDF
• Manual — Download the PDF

Videos