Dyness
Dyness Tower S3 TS10 Energy Storage System 10,66kWh LiFePO4 High Voltage
Dyness Tower S3 TS10 Energy Storage System 10,66kWh LiFePO4 High Voltage
Regular price
€2,230.72
Regular price
Sale price
€2,230.72
Unit price
per
See the price with VAT
Price including VAT by delivery country
- Italy22% €2,721.47
- Germany19% €2,654.55
- France20% €2,676.86
- Austria20% €2,676.86
- Belgium21% €2,699.17
- Bulgaria20% €2,676.86
- Croatia25% €2,788.40
- Cyprus19% €2,654.55
- Czech Republic21% €2,699.17
- Denmark25% €2,788.40
- Estonia24% €2,766.09
- Finland25.5% €2,799.55
- Greece24% €2,766.09
- Hungary27% €2,833.01
- Ireland23% €2,743.78
- Latvia21% €2,699.17
- Lithuania21% €2,699.17
- Luxembourg17% €2,609.94
- Malta18% €2,632.24
- Netherlands21% €2,699.17
- Poland23% €2,743.78
- Portugal23% €2,743.78
- Romania21% €2,699.17
- Slovakia23% €2,743.78
- Slovenia22% €2,721.47
- Spain21% €2,699.17
- Sweden25% €2,788.40
Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).
Free shipping to Italy
Minimum order €400 excl. VAT
Configure your system in two minutes
Pick the inverter and get the batteries it accepts, modules per string, switchboards, price per kWp and a cart ready to check out.
Open the configurator →
Couldn't load pickup availability
- Prices exclude VAT: tax is calculated in the cart based on the delivery country.
- EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
- Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.
Shipping
- Italy: free shipping over €150.
- European Union: 60 € per order, with no threshold
Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.
Delivery in 10-20 daysLiFePO4High voltageDyness
Dyness Tower S3 TS10 Energy Storage System 10,66kWh LiFePO4 High Voltage
The Dyness Tower S3 TS10 is a high-voltage storage system of 10,66kWh made up of 3 battery modules of 3,55kWh each plus the BDU control unit and base. Modules stack into a tower and connect by plug, so installation needs no hand-made power wiring.
Cells are LiFePO4, a cobalt-free chemistry that does not go into thermal runaway and withstands thousands of cycles. The BDU talks to the hybrid inverter over CAN and works at 288V nominal (252–324V), with the high-voltage hybrid inverters on Dyness's compatibility list.
Protection is IP54 on both modules and control unit: the system lives in a garage, plant room or cellar with no extra cabinets. Charging is allowed from 0 to 50 °C and discharging from -10 to 50 °C.
At a glance
Rated energy10,66kWh
Make-up3 modules of 3,55kWh + BDU and base
Cell chemistryLiFePO4, cobalt free
System voltage288V nominal (252-324V), BMS over CAN
ProtectionIP54
Technical data
| Feature | Value |
|---|---|
| Manufacturer | Dyness |
| Model | Tower S3 TS10 |
| Rated energy | 10,66kWh |
| Battery modules | 3 x 3,55kWh |
| Cell chemistry | LiFePO4 |
| Architecture | High voltage, stackable tower |
| System voltage range | 252 - 324V (288V nominal) |
| Control unit | BDU + base |
| Communication | CAN |
| Charging temperature | 0 ... +50 °C |
| Discharging temperature | -10 ... +50 °C |
| Enclosure rating | IP54 |
| Installation | Floor standing, indoor |
Installation and commissioning must be carried out by qualified personnel, in line with local regulations and the manufacturer's instructions.