Noark
Noark 102399 Ex9CH20 Modular Contactor 20A 2NO 230V Coil
Noark 102399 Ex9CH20 Modular Contactor 20A 2NO 230V Coil
Regular price
€28.97
Regular price
Sale price
€28.97
Unit price
per
See the price with VAT
Price including VAT by delivery country
- Italy22% €35.34
- Germany19% €34.47
- France20% €34.76
- Austria20% €34.76
- Belgium21% €35.05
- Bulgaria20% €34.76
- Croatia25% €36.21
- Cyprus19% €34.47
- Czech Republic21% €35.05
- Denmark25% €36.21
- Estonia24% €35.92
- Finland25.5% €36.35
- Greece24% €35.92
- Hungary27% €36.79
- Ireland23% €35.63
- Latvia21% €35.05
- Lithuania21% €35.05
- Luxembourg17% €33.89
- Malta18% €34.18
- Netherlands21% €35.05
- Poland23% €35.63
- Portugal23% €35.63
- Romania21% €35.05
- Slovakia23% €35.63
- Slovenia22% €35.34
- Spain21% €35.05
- Sweden25% €36.21
Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).
Free shipping to Italy
Minimum order €400 excl. VAT
Configure your system in two minutes
Pick the inverter and get the batteries it accepts, modules per string, switchboards, price per kWp and a cart ready to check out.
Open the configurator →
Couldn't load pickup availability
- Prices exclude VAT: tax is calculated in the cart based on the delivery country.
- EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
- Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.
Shipping
- Italy: free shipping over €150.
- European Union: 60 € per order, with no threshold
Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.
Delivery in 10-20 daysProtection deviceAC sideNoark
Noark 102399 Ex9CH20 Modular Contactor 20A 2NO 230V Coil
The Noark 102399 is a modular contactor (installation relay) of the Ex9CH20 series with a rated operational current of 20A in category AC-1, two normally open contacts (2NO) and a 220–230V AC, 50/60Hz control coil. It takes up a single DIN module.
It is installed in residential and commercial distribution boards to remotely switch power loads by means of an auxiliary signal: lighting of communal and outdoor areas, switched sockets, heating elements, fan coil units, circulation pumps and small motors. The coil is driven by push buttons, time switches, thermostats, twilight relays or automation system outputs, while the two power contacts close the main circuit. With a power dissipation of just 1.47W and the width of a single module, it is easily fitted next to the protective devices in existing consumer units. The device complies with the requirements of the IEC/EN 61095 standard for electromechanical contactors for household and similar purposes.
Key features
Two 20A NO contactsSwitching of two power circuits up to 20A in category AC-1, typical of resistive loads and lighting.
Single DIN module18 mm wide and 67.5 mm flush-mounting depth: it takes up minimum space in the board.
220–230V remote controlThe 220–230V, 50/60Hz AC coil is driven by time switches, thermostats, twilight switches and push buttons.
Low dissipationOnly 1.47W of power dissipation, useful in densely populated boards to keep the internal temperature down.
Compliant with IEC/EN 61095Built according to the standard dedicated to electromechanical contactors for household and similar purposes.
Operational voltage up to 400VThe power contacts can work on 230 to 400V networks, including in three-phase configuration with several poles.
Technical specifications
| Feature | Value |
|---|---|
| Product code | 102399 |
| Device type | Modular contactor / installation relay, Ex9CH20 series |
| System side | Alternating current (AC) |
| Rated operational current (AC-1) | 20A |
| Rated operational voltage | 230–400V AC |
| Contact configuration | 2 NO (normally open) contacts |
| Coil voltage | 220–230V AC |
| Rated frequency | 50/60Hz |
| Power dissipation | 1.47W |
| Manual control | No |
| Number of DIN modules | 1 |
| Flush-mounting depth | 67.5 mm |
| Protection rating | IP20 |
| Mounting | 35 mm DIN rail |
| Dimensions | 67.5 × 84.5 × 18 mm |
| Weight | 0.12 kg |
| Standards | IEC/EN 61095 (electromechanical contactors for household and similar purposes) |
Installation and wiring must be carried out by qualified personnel in accordance with the applicable standards and the electrical design of the system.