SMone
SVG Compensator SMone SM-SVG-15-0.4-4L-W 15 kVAr 400V Three-Phase Wall-Mounted
SVG Compensator SMone SM-SVG-15-0.4-4L-W 15 kVAr 400V Three-Phase Wall-Mounted
Regular price
€2,570.80
Regular price
Sale price
€2,570.80
Unit price
per
See the price with VAT
Price including VAT by delivery country
- Italy22% €3,136.37
- Germany19% €3,059.25
- France20% €3,084.96
- Austria20% €3,084.96
- Belgium21% €3,110.66
- Bulgaria20% €3,084.96
- Croatia25% €3,213.50
- Cyprus19% €3,059.25
- Czech Republic21% €3,110.66
- Denmark25% €3,213.50
- Estonia24% €3,187.79
- Finland25.5% €3,226.35
- Greece24% €3,187.79
- Hungary27% €3,264.91
- Ireland23% €3,162.08
- Latvia21% €3,110.66
- Lithuania21% €3,110.66
- Luxembourg17% €3,007.83
- Malta18% €3,033.54
- Netherlands21% €3,110.66
- Poland23% €3,162.08
- Portugal23% €3,162.08
- Romania21% €3,110.66
- Slovakia23% €3,162.08
- Slovenia22% €3,136.37
- Spain21% €3,110.66
- Sweden25% €3,213.50
Shown prices exclude VAT. At checkout the rate of the delivery country applies. Businesses with a valid EU VAT number buy without VAT (reverse charge).
Free shipping to Italy
Configure your system in two minutes
Pick the inverter and get the batteries it accepts, modules per string, switchboards, price per kWp and a cart ready to check out.
Open the configurator →
Couldn't load pickup availability
- Prices exclude VAT: tax is calculated in the cart based on the delivery country.
- EU businesses: 0% VAT with a VAT number valid in VIES — the field appears at checkout, below the delivery address.
- Reduced 10% VAT on solar and storage for customers in Italy: write to us before ordering.
Shipping
- Italy: free shipping over €150.
- European Union: 60 € per order, with no threshold
Rates apply to the cart total and are confirmed at checkout, where shipping to countries outside the EU is also calculated.
Delivery in 10-20 daysPower qualityAC sideSMone
SVG Compensator SMone SM-SVG-15-0.4-4L-W 15 kVAr 400V Three-Phase Wall-Mounted
The SMone SM-SVG-15-0.4-4L-W is a static reactive power compensator (SVG, Static Var Generator) rated 15 kVAr for three-phase 400V networks with neutral (3L+N+PE). Unlike stepped capacitor banks, it generates reactive current continuously through IGBT power electronics: it compensates both inductive and capacitive reactive power and corrects the imbalance between the phases, avoiding penalties on the electricity bill for a low power factor.
It is wall-mounted in the switchgear room, connected in parallel with the line downstream of the metering point, with the current read through external current transformers (secondary current not exceeding 5A). The total response time of less than 10 ms makes it suitable for highly variable loads, while the integrated touch control panel and the RS485 Modbus interface allow configuration, parameter readout and integration into energy monitoring systems, including photovoltaic installations.
Key features
Continuous 15 kVAr compensationSupplies inductive and capacitive reactive power without steps, keeping cos φ at the set value as the load changes.
Response time below 10 msThe IGBT electronics with a 16 kHz switching frequency track load variations in real time, without the transients typical of capacitor banks.
Phase balancingIn addition to power factor correction, it redistributes the currents between the phases, reducing asymmetry and the load on the neutral.
Efficiency above 97 %Low internal losses limit the device's own consumption and the heat to be dissipated inside the panel.
Control and communicationIntegrated touch control panel for configuration and diagnostics, with an RS485 Modbus interface for remote monitoring.
Built-in protectionsOverload, overcurrent, overvoltage and undervoltage, short circuit, network asymmetry, overtemperature and frequency deviation.
Technical specifications
| Feature | Value |
|---|---|
| Product code | 106001 |
| Model | SM-SVG-15-0.4-4L-W |
| Compensation type | Continuous static IGBT-based, inductive and capacitive reactive power, phase balancing |
| Reactive power | 15 kVAr |
| Rated voltage | 400V AC (±20 %) |
| Phases | Three-phase 3L + N + PE |
| Rated frequency | 50Hz (±5 %) |
| Response time | < 10 ms |
| Switching frequency | 16 kHz |
| Efficiency | > 97 % |
| Compensation factor | > 95 % |
| Communication | RS485 (Modbus), dual channel |
| Display | Integrated colour touch control panel; optional external 7" HMI panel |
| Cooling | Forced air, multi-stage active ventilation |
| Noise level | < 60 dB |
| Mounting | Wall-mounted, surface |
| Protection rating | IP20 |
| Operating temperature | -20 °C ... +50 °C (derating above 40 °C) |
| Relative humidity | ≤ 90 % non-condensing |
| Maximum altitude | < 2.000 m |
| Current measurement | With external current transformers (maximum 5A secondary) |
| Dimensions | 460 × 557 × 91 mm |
| Weight | 18.0 kg |
Documentation
PDFDatasheet 106001Official manufacturer documentInstallation and wiring must be carried out by qualified personnel in accordance with the applicable standards and the electrical design of the system.